Dell EMC Unity: Come spostare una DAE da un bus back-end a un altro con DATA in atto (correggibile dall'utente)

Summary: Questo articolo descrive la procedura per spostare un enclosure (DAE) con unità associate da un bus a un altro bus o spostare un enclosure con unità associate in una posizione logica diversa sullo stesso bus. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Si tratta di una procedura offline perché è necessario spegnere e riaccendere l'array. Eseguire un controllo integrità sull'array, creare e scaricare un file di diagnostica come riferimento.

2. Arrestare l'array tramite il menu Service.

3. Attendere che l'array si spegni completamente. (l'operazione può richiedere fino a 30 minuti).

4. Spostare e ricablare i DAE in base alle esigenze.

5. Accendere l'array.

6. Controllare nella GUI di Unity tramite il menu Service se tutte le modifiche sono state riconosciute. (In caso contrario, fermarsi qui e aprire una chiamata al supporto Dell EMC).

7. Ripristino dell'array per l'utilizzo in produzione.

Additional Information

Per informazioni di base, consultare il white paper "INTRODUZIONE ALLA PIATTAFORMA UNITY" su support.emc.com .

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F , Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000019023
Article Type: How To
Last Modified: 16 Oct 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.