Dell EMC Unity: Een DAE verplaatsen van de ene back-endbus naar een andere bus met DATA op zijn plaats (op te lossen door gebruiker)

Summary: In dit artikel wordt beschreven hoe u een behuizing (DAE) met gebonden schijven van de ene bus naar de andere bus kunt verplaatsen of een behuizing met gebonden schijven naar een andere logische positie op dezelfde bus kunt verplaatsen. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Dit is een offline procedure omdat de array moet worden uit- en weer ingeschakeld. Voer een healthcheck uit op de array, maak en download een diagnostisch bestand ter referentie.

2. Sluit de array af via het menu Service.

3. Wacht tot de array volledig is uitgeschakeld. (Dit kan tot 30 minuten duren.)

4. Verplaats de DAE's en bekabel ze indien nodig.

5. Schakel de array in.

6. Controleer in de Unity GUI via het menu Service of alle wijzigingen zijn herkend. (Als dit niet het geval is, stop dan hier en open een supportgesprek met Dell EMC Support).

7. Breng de array terug naar productie.

Additional Information

Raadpleeg voor achtergrondinformatie de whitepaper "INLEIDING TOT HET UNITY PLATFORM" op support.emc.com.

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F , Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000019023
Article Type: How To
Last Modified: 16 Oct 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.