VPLEX: How to Change the IP configuration of a WAN-COM link

Summary: This KB directs you to the SolVe document on 'How to Change the IP configuration of a WAN-COM link'.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Steps are needed to change the IP configuration of the VPLEX WAN COM link. Detailed procedure steps for this change can be found on Solve Online or Solve Desktop.

This procedure can be found in the VPLEX Solve Procedure Generator at the following location:
VPlex -> Admin Procedures -> Manage ->  Change the IP configuration of a WAN-COM link -> Select applicable code version

** NOTE **
If Solve Desktop is required as you may be at dark site and not able to connect to the internet, please reference KBA 000021625 on how to download and install SolVe Desktop on your system.


Affected Products

VPLEX

Products

VPLEX GeoSynchrony, VPLEX VS2, VPLEX VS6
Article Properties
Article Number: 000019137
Article Type: How To
Last Modified: 28 Jan 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.