Dell EMC Unity: UEMCLI를 사용하여 호스트에서 LUN을 연결 해제하는 방법(DELL EMC에서 수정 가능)
Summary: UEMCLI를 사용하여 호스트에서 LUN 연결 해제
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
UEMCLI를 사용하여 호스트/호스트에서 LUN을 연결 해제하는 다양한 방법:
1. uemcli -u admin -p admin_pass /stor/prov/luns/lun -id LUN_ID set -lunHosts 'HOST_ID, HOST_ID'
특정 호스트에 대한 LUN 액세스를 정의하고 언급되지 않은 다른 모든 호스트
에서 LUN을 자동으로 연결 해제합니다. 또는:
2. uemcli -u admin -p admin_pass /stor/prov/luns/lun -id LUN_ID set -lunHosts ""
이렇게 하면 할당된 모든 호스트
에서 LUN이 연결 해제됩니다. Get LUN ID command
uemcli /stor/prov/luns/lun show
get Host ID command
uemcli /remote/host show
1. uemcli -u admin -p admin_pass /stor/prov/luns/lun -id LUN_ID set -lunHosts 'HOST_ID, HOST_ID'
특정 호스트에 대한 LUN 액세스를 정의하고 언급되지 않은 다른 모든 호스트
에서 LUN을 자동으로 연결 해제합니다. 또는:
2. uemcli -u admin -p admin_pass /stor/prov/luns/lun -id LUN_ID set -lunHosts ""
이렇게 하면 할당된 모든 호스트
에서 LUN이 연결 해제됩니다. Get LUN ID command
uemcli /stor/prov/luns/lun show
get Host ID command
uemcli /remote/host show
Additional Information
이 명령은 https://support.emc.com/docu69330_Unity-Family-Unisphere-CLI-User-Guide.pdf?language=en_US 문서에 있습니다.
이 명령과 다양한 사용법 및 부분에 대한 자세한 내용은 페이지 390 'LUN 변경'을 참조하십시오.
이 명령과 다양한 사용법 및 부분에 대한 자세한 내용은 페이지 390 'LUN 변경'을 참조하십시오.
Affected Products
Dell EMC Unity FamilyProducts
Dell EMC Unity FamilyArticle Properties
Article Number: 000019161
Article Type: How To
Last Modified: 11 Dec 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.