NetWorker:配置 NetWorker 服务器报告主页功能
Summary: NetWorker:配置 NetWorker 服务器报告主页功能
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
有关报告主页功能的信息。
默认情况下,安装 NetWorker 服务器软件会启用报告主页功能。报告主页需要 NetWorker 服务器上的电子邮件功能。与 ConnectEMC 类似,此连接支持在 NetWorker 软件中的事件触发默认通知时将 NetWorker 配置信息传递给 EMC 支持。
默认通知会向 EMC 支持部门发送一封电子邮件,其中包含 NSR RAP 属性数据。该电子邮件不包含其他信息或客户端数据。
在 Windows 上,报告主页输出文件的默认路径位于 NetWorker_install_path\nsr\applogs\rh
注意:您可以使用 Report home 或 ConnectEMC,但应只启用其中一项功能,因为它们提供相同信息的不同传递方法。EMC 建议在 NetWorker 版本 9.0 及更高版本中使用 ConnectEMC。ConnectEMC 提供的配置信息可帮助支持工程师解决升级问题。
环境:
- NetWorker 9.1+ 分支
启用报告主页功能
要启用报告主页功能,请使用 nsradmin 界面指定支持 SMTP 中继的邮件服务器。过程
1.在 NetWorker 服务器中,启动 nsradmin 程序:
# nsradmin 2.At the nsradmin prompt, type:
# print type: nsr report home 3.Edit the mail program attribute of the report home resource and type the name of the default mail server. For example, type:
# update mail program: smtpmail -h mailserver 4.To review the resource configuration, type:
# print 5. To exit the nsradmin. program, type:
# quit
手动运行 Report Home 报告
要将 Report Home 报告配置为立即启动并在计划的时间之外运行,请使用 nsradmin 界面。1.在 NetWorker 服务器上,从命令提示符启动 nsradmin 程序。
2.在 nsradmin 提示符处,键入:
# print type: NSR task; name: DefaultReportHomeTask 3.To edit the autostart attribute of the DefaultReportHomeTask resource and set it to start now, type:
# update autostart: start now 4.To review the resource configuration, type:
# print 5. To exit the nsradmin program, type:
# quit
禁用 Report Home 功能
要禁用报告主页功能,请使用 nsradmin 界面。1.在 NetWorker 服务器上,从命令提示符启动 nsradmin 程序。
2.在 nsradmin 提示符处,键入:
# print type: NSR task; name: DefaultReportHomeTask 3. To edit the autostart attribute of the DefaultReportHomeTask resource and set it to Disabled, type:
# update autostart: Disabled 4. To review the resource configuration, type:
# print 5. To exit the nsradmin program, type:
# quit
指定报告主页报告的发件人电子邮件地址和其他电子邮件收件人
您可以编辑发件人电子邮件地址属性,以包括公司内部的任何电子邮件地址。# update sender email address: my_email_address@domain.com
To edit the additional email recipients attribute and specify additional email recipients, type:
# update additional email recipients: my_email_address@domain.com
Additional Information
有关更多信息,请参阅 NetWorker 文档。
Affected Products
NetWorkerProducts
NetWorkerArticle Properties
Article Number: 000019355
Article Type: How To
Last Modified: 13 Jun 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.