VNX: How To Remove a LUN from a Storage Group (User Correctable)
Summary: How To Remove a LUN from a Storage Group (User Correctable)
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Please follow the steps below
1- Login to Unisphere and select the array serial number
2- Click on the system Tab
3- Click on the Host Tab
4- click on Storage Group
5- Highlight the desired Storage Group, then click on Properties.
6- A new pop-up window will appear, choose the LUN Tab.
7- At the bottom half you will see the LUNs that are in that Storage Group, click on the LUN you wish to remove to highlight it
8-Click on the "Remove" button to remove it. (you may not receive an alert asking if you are sure)
9- Click Apply, or Okay to confirm.
Below is a video demonstration of the same
Additional Information
For steps on how to delete a LUN see Dell EMC article 490853.
https://support.emc.com/kb/490853
Affected Products
vVNXArticle Properties
Article Number: 000019494
Article Type: How To
Last Modified: 23 Sep 2024
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.