ECS: Hvordan legge til eller fjerne en DNS-server

Summary: Denne artikkelen viser hvordan du endrer ECS DNS-konfigurasjonen.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Viktig merknad: ECS-funksjonalitet er svært avhengig av riktig DNS-oppløsning. Hvis DNS ikke fungerer som den skal, kan det føre til at Data ikke er tilgjengelig (DU).

Før du endrer DNS-innstillingene, må du alltid bekrefte med kunden.

Merk: En ny funksjon er utgitt i xDoctor 4-8.104.0 og nyere. Dette er nå automatisert med xDoctor for raskt å forsøke å oppdage den potensielle årsaken til xDoctor RAP075 feil. Hvis skriptet ikke klarer å rette opp xDoctor RAP075-feilene, gir det en detaljert oppsummering av funnene.

Hvis du vil ha mer informasjon, kan du følge artikkelen ECS: ObjectScale: Slik kjører du KB-automatiseringsskript (autopilot) (du må logge på som registrert Dell-kundestøttebruker for å lese denne artikkelen). Hvis du ikke kan oppgradere til xDoctor 4.8.104 eller nyere, følg håndboken i denne artikkelen.

Prosess:

  1. Slik finner du hovednoden til racket:
Kommando: 
# ssh master.rack
Eksempel: 
admin@ecsnode5:~>  ssh master.rack
admin@ecsnode1:~>
  1. For å finne NAN IP, kan du bruke IP-adressen som er identifisert i varselet eller fra getclusterinfo -i for målet ditt med dette skriptet:
Kommando: 
# getclusterinfo -i
Eksempel: 
admin@ecsnode1:~> getclusterinfo -i

Registered Racks
================

Ip Address        epoxy   seg mac             seg color    seg id    NAN Hostname
===============   =====   =================   ==========   =======   ============
169.254.1.1      False   00:00:00:00:00:00   red          1         provo-red.nanlocal
Node private      Node              Public                                BMC
Ip Address        Id       Status   Mac                 Ip Address        Mac                 Ip Address        Private.4(NAN)    Node Name
===============   ======   ======   =================   ===============   =================   ===============   ===============   =========
192.168.219.1     1        MA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.101   169.254.1.1       provo-red
192.168.219.2     2        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.102   169.254.1.2       sandy-red
192.168.219.3     3        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.103   169.254.1.3       orem-red
192.168.219.4     4        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.104   169.254.1.4       ogden-red
192.168.219.5     5        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.105   169.254.1.5       layton-red
192.168.219.6     6        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.106   169.254.1.6       logan-red
192.168.219.7     7        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.107   169.254.1.7       lehi-red
192.168.219.8     8        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.108   169.254.1.8       murray-red
Status:
M - Master, S - Slave
E - Epoxy
I - Initializing, U - Updating, A - Active
P - On, O - Off
! - Warning/Error list:
    1 -(W) Hostname set to default hostname set by installer


169.254.2.1      False   00:00:00:00:00:00   green        2         tucson-green.nanlocal
Node private      Node              Public                                BMC
Ip Address        Id       Status   Mac                 Ip Address        Mac                 Ip Address        Private.4(NAN)    Node Name
===============   ======   ======   =================   ===============   =================   ===============   ===============   =========
192.168.219.1     1        MA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.101   169.254.2.1       provo-green
192.168.219.2     2        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.102   169.254.2.2       sandy-green
192.168.219.3     3        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.103   169.254.2.3       orem-rgreen
192.168.219.4     4        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.104   169.254.2.4       ogden-green
192.168.219.5     5        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.105   169.254.2.5       layton-green
192.168.219.6     6        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.106   169.254.2.6       logan-green
192.168.219.7     7        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.107   169.254.2.7       lehi-green
192.168.219.8     8        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.168.219.108   169.254.2.8       murray-green
Status:
M - Master, S - Slave
E - Epoxy
I - Initializing, U - Updating, A - Active
P - On, O - Off
! - Warning/Error list:
    1 -(W) Hostname set to default hostname set by installer

 

  1. Kjør automatiseringskommandoen fra hovednoden med xDoctor 4-8.104.0 og nyere.  Denne automatiseringen er menydrevet med valideringstrinn gjennom hele utførelsen.

Merk: Følgende valideringer finner sted før du legger til den nye IP-adressen til DNS-serveren:

    • Valider videresendt DNS-oppslag.
    • Valider omvendt DNS-oppslag.
    • Valider og vis manglende samsvar mellom DNS-oppslag.

Kommando:

# sudo xdoctor autopilot --kb 19614 --target-rack <rack color>

Eksempel: (I dette eksemplet jobber vi med rack 1)

admin@ecsnode1:~> sudo xdoctor autopilot --kb 19614 --target-rack red

Using /etc/ansible/ansible.cfg as config file
VERSION: 3.0
Playbook tasks: 66
Role tasks: 28
Total tasks: 94 across 1 host(s)

 

Alternativ for automatisering av skript:

  1. Velg alternativet du vil gjøre Legg til en DNS-server i konfigurasjonen eller Fjern en DNS-server fra konfigurasjonen.
TASK [Ask user if they want to change DNS IP configuration or DNS search configuration] **********************************************************************************************************************
[Ask user if they want to change DNS IP configuration or DNS search configuration]
******************************************************************************
Please select one of the following options to change DNS IP or DNS search configuration:
******************************************************************************
(1) Change DNS IP configuration.
(2) Change DNS search configuration.

(0) Exit
******************************************************************************"

 

  1. Endring av DNS IP-konfigurasjon. 
TASK [Ask user if they want to add or remove a DNS server] ***************************************************************************************************************************************************
[Ask user if they want to add or remove a DNS server]
******************************************************************************
Please select one of the following options to add or remove an DNS server:
******************************************************************************
(1) Add an DNS server to the configuration.
(2) Remove an DNS server from the configuration.

(0) Exit
******************************************************************************
:
    1. Endre DNS IP-konfigurasjon ->(1) Legg til en DNS-server i konfigurasjonen.
TASK [Ask for DNS server IP if adding] ***********************************************************************************************************************************************************************
[Ask for DNS server IP if adding]
******************************************************************************
Enter the IP of the DNS server you want to add:
******************************************************************************
:
    1. Endre DNS IP-konfigurasjon ->(2) Remove an DNS server from the configuration
TASK [Prompt user to select DNS server to remove] ************************************************************************************************************************************************************
[Prompt user to select DNS server to remove]
*******************************************************************************
Enter the letter of the DNS server you want to remove:
*******************************************************************************

(0) Exit
*******************************************************************************
:

 

  1. Endre konfigurasjon av DNS-søk.
TASK [Ask user if they want to add or remove a DNS search domain] ********************************************************************************************************************************************
[Ask user if they want to add or remove a DNS search domain]
******************************************************************************
Please select one of the following options to add or remove an DNS search domain:
******************************************************************************
(1) Add a DNS search domain.
(2) Remove a DNS search domain.

(0) Exit
******************************************************************************
    1. Endre konfigurasjon av DNS-søk. -> (1) Legg til et DNS-søkedomene.
TASK [Ask for DNS search domain if adding] *******************************************************************************************************************************************************************
[Ask for DNS search domain if adding]
******************************************************************************
Please enter the DNS search domain you want to add:
******************************************************************************
:
    1. Endre konfigurasjon av DNS-søk. -> (2) Fjern et DNS-søkedomene
TASK [Prompt user to select DNS search domain to remove] *****************************************************************************************************************************************************
[Prompt user to select DNS search domain to remove]
******************************************************************************
Please select the DNS search domain you want to remove:
******************************************************************************
(a) xxxx.xxxx.com

(0) Exit
******************************************************************************
:

Manuell inndeling

I tilfelle skriptet mislykkes:

Slik legger du til IP-er og DNSSearch i DNS-konfigurasjonen:

Bruk setrackinfo -a for å konfigurere DNS-serveren. Gjenta kommandoen for hver DNS-server hos kunden (eller atskilt med mellomrom). 
# sudo setrackinfo -a DNSServer <DNS_Server_IP>

Example:
# sudo setrackinfo -a DNSServer x.x.x.x
# sudo setrackinfo -a DNSServer y.y.y.y
or
# sudo setrackinfo -a DNSServer x.x.x.x y.y.y.y
Bruk setrackinfo -a for å konfigurere DNS-søk. Vi må kjøre kommandoen én gang for hver spesifikasjonsrekkefølge av mest spesifikk til minst spesifikk. 
# sudo setrackinfo -a DNSSearch <DNS_Search_Specification>

Example:
# sudo setrackinfo -a DNSSearch corp.dell.com
# sudo setrackinfo -a DNSSearch dell.com

Slik fjerner du IP-adresser fra DNS-konfigurasjon:

Bruk setrackinfo -d for å fjerne én eller flere fra en liste (gjelder DNSServer eller DNSSearch) 
Example:
# sudo setrackinfo -d DNSServer x.x.x.x y.y.y.y

Additional Information

Hvis du vil ha informasjon om NTP-konfigurasjon, kan du se KB ECS: Slik legger du til eller fjerner en NTP-server.

Affected Products

ECS Appliance

Products

ECS Appliance, Elastic Cloud Storage
Article Properties
Article Number: 000019614
Article Type: How To
Last Modified: 24 Jul 2025
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.