ViPR SRM How to discovery of Brocade switches through SMI-S Provider
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Sent customer the steps how to add the brocade switches via CMCNE(SMI-S Proviider)
Additional Information
Please follow steps below to discover Brocade Switch through SMI-S collector.
1. You have to install the Brocade solution pack.
- After you installed the Solution Pack >> go to SolutionPacks >> Storage>> Brocade FC Switch >> open the Brocade-fc-switch SMI Data Collection
On the Reconfiguring windows >> Click on the drop down of SMI-S Discovery Configuration option >>- Add a new SMI-S Discovery Configuration Option-
Please make sure the Restrict SMI-S to zoning discovery only is uncheck like below >> then hit the Reconfigure button.
2. Add the SMI-S server to SRM
- Now you have to go back to Discovery Center >> Inventory Management >> Brocade SMI Provider
- click the add button >> then fill the information of your SMI Provider IP Adress/Username/password>> Click Validate add
It will take few hours for Brocade switch data show up in the Report Library
Affected Products
SRMProducts
SRMArticle Properties
Article Number: 000019717
Article Type: How To
Last Modified: 20 Nov 2020
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.