Dell EMC Unity: How to change the Site ID of an array. (Dell EMC Correctable)
Summary: Here is how to properly update the DELL EMC install base that a Unity system is installed at. This is a requirement for proper ESRS deployment for a Unity Array and will assist with properly shipping replacement parts to the correct address. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
In order to have the DELL EMC install base updated to reflect a new or updated site location. The records must be updated to properly reflect the new physical location for the system. Please be sure that the SITE ID you are about to change the Unity array to has the same physical address as where the system actually physically resides. (Example: Use the address of the data center, not the corporate home office). This will assist with faster problem resolution by having replacement parts shipped to the correct address. The Site Id is also very important to assist with proper Unity ESRS deployments.
If you require a Site Id to be updated, please contact remote support and reference this Knowledge Base Article.
If you require a Site Id to be updated, please contact remote support and reference this Knowledge Base Article.
Affected Products
Dell EMC Unity FamilyProducts
Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F
, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition
...
Article Properties
Article Number: 000022541
Article Type: How To
Last Modified: 07 Nov 2025
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.