VPLEX: How to reduce Java's high CPU utilization on the management server.

Summary: This article walks you through the process of lowering the Java's high CPU utilization percentage.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Restart the Management Station console from the management server using the command;
sudo /etc/init.d/VPlexManagementConsole restart

Checking the VPlex management server Java utilization, we can see the percentage is high.

service@#########:~> top
top - 14:45:38 up 993 days, 3:16, 4 users, load average: 1.37, 1.43, 1.47
Tasks: 137 total, 2 running, 135 sleeping, 0 stopped, 0 zombie
Cpu(s): 50.9%us, 0.3%sy, 0.0%ni, 48.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3920420k total, 3361876k used, 558544k free, 26616k buffers
Swap: 8388604k total, 3750660k used, 4637944k free, 350828k cached

PID   USER     PR NI VIRT  RES  SHR  S %CPU %MEM TIME+    COMMAND
11316 service  25 5  6902m 2.7g 9868 S 101  71.4 47236:56 java

Cause

NA

Resolution

Before restarting any management console or management server, ensure there are no ongoing migrations (device or extent)

Please run the below commands on the Management Station console:

Step 1: Verify the management server console's pid:

Example:
service@#########:~> sudo /etc/init.d/VPlexManagementConsole status
VPlexManagementConsole is running (pid 11315)


Step 2: Restarting of management server console: (to restart the Management Server software).

Example:
service@#########:~> sudo /etc/init.d/VPlexManagementConsole restart
Restarting EMC VPlex Management Console... done


Step 3: Post restarting the management server software verify the pid (console will run with new pid):

Example:
service@#########:~> sudo /etc/init.d/VPlexManagementConsole status
VPlexManagementConsole is running (pid 23533)



After restarting the management console, check if the issue is resolved.

service@#########:~> top
top -      15:05:08 up 993 days, 3:36, 5 users, load average: 1.72, 1.57, 1.52
Tasks:     144 total,     2 running,         142 sleeping,       0 stopped,     0 zombie
Cpu(s):    36.8%us,       2.0%sy, 0.0%ni, 45.3%id, 15.7%wa, 0.0%hi, 0.2%si, 0.0%st
Mem:       3920420k       total,     1446552k       used, 2473868k free, 27192k buffers
Swap:      8388604k       total,     81112k         used, 8307492k free, 484428k cached


PID   USER     PR  NI  VIRT  RES  SHR  S %CPU %MEM  TIME+    COMMAND
23534    service            20       0        2840m      1.2g     23m    S     6         33.0     22:57.52          java

Affected Products

VPLEX Series

Products

VPLEX for All Flash, VPLEX GeoSynchrony, VPLEX Series, VPLEX VS2, VPLEX VS6
Article Properties
Article Number: 000029009
Article Type: Solution
Last Modified: 28 Feb 2021
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.