Avamar Target VM: VM-hostname kan ikke nå proxyen: Proxy-FullyQualifiedDomainName ved hjælp af https://proxyIPAddr på grund af forkert netværkskonfiguration

Summary: Under forsøget på at udføre en Virtual Machine (VM) FLR bemærkes fejlmeddelelsen ovenfor. FLR fejler derefter efter lang tids kørsel.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Gendannelse af filniveau for virtuel maskine: Følgende fejl vises i Avamar-administrationens brugergrænseflade.

kA2f1000000KBDyCAO_3_0

Sms-fejlmeddelelse:

Error message: Target VM: VM-hostname cannot reach proxy: Proxy-FullyQualifiedDomainName via https://proxyIPAddr due to incorrect network configuration.
Restoration may take significantly longer time Press "Continue" to start the restore

                                                                             

Cause

Den tjeneste, der er ansvarlig for at lytte på port 443 i proxyen, kører ikke:
 

Proxy-FullQualifiedDomainName:~ # netstat -plnt |egrep "Proto|443"
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name

Proxy-FullQualifiedDomainName:~ # service jetty status
Jetty Info: Jetty Service is not running.


 

Resolution

Start tjenesten, før du prøver igen for FLR.
  
Proxy-FullQualifiedDomainName:~ # service jetty start
Shutting down vami-lighttpd:done.
Jetty Info: Jetty daemon started.

Proxy-FullQualifiedDomainName:~ # service jetty status
Jetty Info: Jetty Service is running.[13234]

Proxy-FullQualifiedDomainName:~ # netstat -plnt |egrep "Proto|443"
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 :::443                  :::*                    LISTEN      13234/java



-- Also make sure the service is configured to start automatically in multi-user runlevels:
 

Proxy-FullQualifiedDomainName:~ # chkconfig --list |grep jetty
jetty                     0:off  1:off  2:on   3:on   4:on   5:on   6:off


-- Case change the service configuration to automatically start on given runlevels is necessary, use command below:

Proxy-FullQualifiedDomainName:~ # chkconfig --level 2345 jetty on

-- In case the above steps didn't fix the issue, follow next steps:
  1.  Rediger usr/local/avamarclient/bin/config.xml på den proxy, der bruges til FLR.
  2.  Skift værdien af wget-parameteren fra 0 til 1 for at være som nedenfor: 
     <enablewgetrestore>1</enablewgetrestore> 




Affected Products

Avamar
Article Properties
Article Number: 000050308
Article Type: Solution
Last Modified: 05 Sep 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.