PowerFlex: MDM 추가 오류 IP 주소 수가 잘못되었습니다.
Summary: MDM을 클러스터에 추가하거나 IP 주소를 업데이트하려고 할 때 다음과 같은 오류 메시지가 나타납니다. 오류: MDM 명령에 실패했습니다. 상태: 잘못된 IP 주소 수 운영 MDM, 보조 MDM 및 Tie Breaker의 IP 주소 수는 각각 동일해야 합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
MDM을 클러스터에 추가하거나 IP 주소를 업데이트하려고 할 때 다음과 같은 오류 메시지가 나타납니다. 오류: MDM 명령에 실패했습니다. 상태: 잘못된 IP 주소 수 운영 MDM, 보조 MDM 및 Tie Breaker의 IP 주소 수는 각각 동일해야 합니다.
Cause
운영 MDM, 보조 MDM 및 Tie Breaker의 IP 주소 수가 동일해야 합니다.
Resolution
명령을 실행할 때 다음 옵션을 사용합니다. --allow_asymmetric_ips.
전체 명령은 다음과 같습니다.
scli --add_standby_mdm --mdm_role manager --new_mdm_ip <ip1>,<ip2> --allow_asymmetric_ips.
Affected Products
VxFlex Product FamilyProducts
VxFlex Product FamilyArticle Properties
Article Number: 000050394
Article Type: Solution
Last Modified: 04 Sep 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.