Dell Unity: Kan ikke slette systemsnapshot (kan rettes af Dell)
Summary: Fejlkode: 0x716d80b0, når du sletter et systemsnapshot
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Der opstod en fejl under forsøg på at slette snapshottet fra kilden efter sletning af replikeringssessionen fra destinationssiden.
CLI
service@(none) spb:~> uemcli -u admin -p Password /prot/snap -id delete
Operation failed. Error code: 0x716d80b0
The specified operation cannot be performed on a system snapshot. (Error Code:0x716d80b0)
Unisphere
Sletteknappen er deaktiveret med følgende fejlmeddelelse "
Cannot delete system snapshot":
Cause
Systemsnapshots bruges til interne formål som replikering. Ideelt set bør sletning af replikering automatisk slette systemsnapshots.
Resolution
Systemsnapshottet kan ikke ødelægges ved hjælp af standardkommandoer eller Unisphere-brugergrænsefladen.
Kontakt Dells tekniske support eller din autoriserede servicerepræsentant, og oplys dette artikel-id i Dell Knowledge Base.
Kontakt Dells tekniske support eller din autoriserede servicerepræsentant, og oplys dette artikel-id i Dell Knowledge Base.
Affected Products
Dell EMC Unity FamilyProducts
Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family
, Dell EMC Unity Hybrid
...
Article Properties
Article Number: 000052824
Article Type: Solution
Last Modified: 11 Apr 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.