Dell Unity: Kan systeemsnapshot niet verwijderen (op te lossen door Dell)
Summary: Foutcode: 0x716d80b0 bij het verwijderen van een systeemsnapshot
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Fout bij het verwijderen van de snapshot van de bron na het verwijderen van de replicatiesessie van de doelzijde.
CLI
service@(none) spb:~> uemcli -u admin -p Password /prot/snap -id delete
Operation failed. Error code: 0x716d80b0
The specified operation cannot be performed on a system snapshot. (Error Code:0x716d80b0)
Unisphere
De verwijderknop is uitgeschakeld met de volgende foutmelding "
Cannot delete system snapshot":
Cause
Systeemsnapshots worden gebruikt voor interne doeleinden zoals replicatie. In het ideale geval zouden de snapshots van het systeem automatisch moeten worden verwijderd uit het verwijderen van replicatie.
Resolution
De snapshot van het systeem kan niet worden vernietigd met behulp van standaardopdrachten of de Unisphere-gebruikersinterface.
Neem contact op met de technische support van Dell of met uw geautoriseerde servicevertegenwoordiger en vermeld deze ID van dit Dell Knowledge Base-artikel.
Neem contact op met de technische support van Dell of met uw geautoriseerde servicevertegenwoordiger en vermeld deze ID van dit Dell Knowledge Base-artikel.
Affected Products
Dell EMC Unity FamilyProducts
Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family
, Dell EMC Unity Hybrid
...
Article Properties
Article Number: 000052824
Article Type: Solution
Last Modified: 11 Apr 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.