Dell Unity: Softwareopgraderingen mislykkedes, og tilstandstjekket Fejl:check_replication

Summary: En Dell Unity-softwareopgradering mislykkes med "Health Check Error:check_replication_health_2, check_replication_health_5". Softwareopdateringen kan også mislykkes med 'Advarsel: check_replication_health_4'. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Opgrader tilstandstjekmeddelelser og hændelsesadvarsler:

Fejl
The health check has failed. One or more remote system problems were detected on the system and causes the upgrade to fail. Record the error code and search the Dell Online Support website for available support options.
[Error Code: platform::check_replication_health_2]

-------------------------------------Errors-------------------------------------
Platform: Check replication health
Sync is in progress for the following replication sessions:
         * VRT_xxxx_xx
Action : Cannot perform upgrade while a sync is in progress for a
         replication session. Please wait until the sync completes or pause the
         sessions and retry the upgrade.
ERROR_CODE=platform::check_replication_health_5|Error|VRT_xxxx_xx

Events > Alerts > Information: 
The remote system connection is out of date. Update the connection with the latest interface changes.

Warnings
One or more replication sessions are configured to be auto-synchronized. This could cause a problem during an upgrade. Pause the replication sessions prior to starting the upgrade and resume them after completing the upgrade. 
[Warning Code=platform::check_replication_health_4]

/nas/log/check_health.161031-152020.log
------------------------------------Warnings------------------------------------
Platform: Check replication health
The following replication sessions should be paused prior to starting the upgrade:
         * rep_sess_res_84_res_1_FNMxxxxxxxxxxx_FNMxxxxxxxxxxx
         * rep_sess_res_85_res_2_FNMxxxxxxxxxxx_FNMxxxxxxxxxxx
Action : Since these are auto-synchronized sessions, they could get  into critical state if replication attempts a sync during the upgrade.  To avoid this issue, please pause these sessions before starting the upgrade and resume them after the upgrade.

ERROR_CODE=platform::check_replication_health_4|Warning|rep_sess_nas_44_nas_1_FNMxxxxxxxxxxx_FNMxxxxxxxxxxx
* rep_sess_res_84_res_1_FNMxxxxxxxxxxx_FNMxxxxxxxxxxx
* rep_sess_res_85_res_2_FNMxxxxxxxxxxx_FNMxxxxxxxxxxx
-------------------------------------Errors-------------------------------------
Platform: Check replication health
The following remote systems have health problems:
         * FNMxxxxxxxxxxx
Action : Escalate this issue through your support organization and provide this output in your escalation.
ERROR_CODE=platform::check_replication_health_2|Error|FNMxxxxxxxxxxx
--------------------------------------------------------------------------------
UPGRADE CANNOT PROCEED.
Check Result: Error

spb:~$ uemcli /remote/sys -id RS_1 show -detail |grep Health
      Health state                 = Minor failure (15)
      Health details               = "Update the remote system connection to pick up the latest interface changes on the local and remote systems."

Unisphere > Replikeringsforbindelser>
, der holdes markøren over advarselstrekanten, viser:
"Update the remote system connection to pick up the latest interface changes on the local and remote systems." 

Cause

  1. For fejl i tilstandstjekket er den underliggende årsag, at forbindelsen mellem de to (2) replikeringssystemer skal opdateres. Replikeringsforbindelserne kræver manuel opdatering, hver gang lagerprocessorerne (SP'er) genstartes, eller systemadministrationstjenesten genstartes.
  2. For advarslen om tilstandskontrol skal replikeringssessionerne afbrydes midlertidigt på kildesystemets NAS-server og hvert enkelt filsystem.
    BEMÆRK:  Hvis du sætter kildesiden på pause, ændres replikeringstilstanden på destinationssiden til sat på pause.

Resolution

For advarselsmeddelelsen skal du sætte alle replikeringssessioner fra kildesystemet på pause, hvilket sætter alle de respektive destinationssessioner på pause:
Løsning: Sæt alle kildereplikeringssessioner
på pause Unisphere-replikeringssessioner >>> Flere handlinger > Sæt på pause


Hvis fejlmeddelelsen mislykkedes, skal du opdatere replikeringsforbindelserne>:
Løsning:  Opdater fjernforbindelse fra kildesystemet
Unisphere-replikeringsforbindelser >>> Bekræft og opdater

BEMÆRK:  Forbindelsen bør opdatere og vise en grøn markeringsstatus.

Additional Information


Affected Products

Dell EMC Unity, Dell Unity 450F DC, Dell Unity 300, Dell Unity 300 DC, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell Unity 350F DC, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity 400, Dell Unity 400 DC, Dell EMC Unity 400F , Dell EMC Unity 450F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Hybrid ...

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 500 , Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition ...
Article Properties
Article Number: 000058805
Article Type: Solution
Last Modified: 20 Oct 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.