Alert: RAID Rebuild status
Summary: Alert: RAID Rebuild status
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
This is an informational message regarding the status of a RAID Rebuild. A RAID Rebuild will occur if a disk fails or if there is a communication issue to the enclosure / disks. A Rebuild go through various states of operation. The various states of operation that can be seen are:
- Not yet started
- Halted: waiting for disk to rebuild in place
- Halted: initial section rebuilt, waiting to be relaunched
- Running: replacing extent
- Halted: waiting for replacement disk
- Running: rebuilding data
- Halted: administratively disabled
- Halted: redundant data unavailable to proceed
- Finished: cleaning up
If the alert message shows the status of a RAID Rebuild is Halted, look for another alert message after the Halted message to see if it changed to Running or Finished. If so, acknowledge the alerts. If not, contact tech support for additional help with this alert.
Videos
Alert: RAID Rebuild status
Affected Products
Compellent (SC, SCv & FS Series), Dell Storage SCv2000, Dell Storage SCv2020, Dell Storage SCv2080, Dell Storage SC9000Article Properties
Article Number: 000116696
Article Type: How To
Last Modified: 27 Mar 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.