Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Het Virtual Router Redundancy Protocol (VRRP) configureren op Dell Networking OS9 switches

Summary: Het Virtual Router Redundancy Protocol (VRRP) configureren op Dell Networking OS9 switches

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content


Instructions

In dit artikel wordt uitgelegd hoe u het Virtual Router Redundancy Protocol (VRRP) configureert op Dell Networking OS9 switches.

 

 
 

Overzicht
 

Met VRRP kunnen meerdere routers actieve/passieve redundantie bieden voor een routerings-IP-adres dat wordt gebruikt door apparaten in een broadcastdomein.

  • VRRP Primair - reageert actief op het virtuele IP-adres
  • VRRP-back-up - gekozen als de primaire als advertenties van de primaire niet langer worden gedetecteerd en begint te reageren op het virtuele IP-adres
  • Virtuele Router Identifier (VRID) - Geconfigureerd om te passen tussen VRRP-routers
  


Configuratieoverzicht
 

  1. Configureer een VRRP-groep en specificeer een VRID op een interface (fysiek of VLAN) in L3-modus met een toegewezen IP-adres.
  2. Configureer een virtueel IP-adres voor de VRRP-groep.
  3. Optioneel - Configureer VRRP-prioriteit.
 


Configuratie


Router 1
 
Opdracht Doel
R1# configure
De configuratiemodus activeren.
R1(conf)# interface VLAN 10
Geef een interface op (fysiek of VLAN).
R1(conf-if-vl-10)#  ip address 10.10.10.2 /24
R1(conf-if-vl-10)#  no shutdown
Stel een IP-adres op de interface in en schakel L3-modus in.
R1(conf-if-vl-10)#  vrrp-group 10
Stel VRRP-groeps-ID (VRID) in.
R1(conf-if-vl-10-vrid-10)#  virtual-address 10.10.10.1
Stel een virtueel IP-adres in voor de VRRP-router. 
R1(conf-if-vl-10-vrid-10)#  priority 200
(Optioneel) Stel prioriteit in voor de primaire verkiezing. De standaardwaarde is 100. Het hoogste getal heeft voorrang. Bereik 1-255.


Router 2
 
Opdracht Doel
R2# configure
De configuratiemodus activeren.
R2(conf)# interface VLAN 10
Geef een interface op (fysiek of VLAN).
R2(conf-if-vl-10)#  ip address 10.10.10.3 /24
R2(conf-if-vl-10)#  no shutdown
Stel een IP-adres op de interface in en schakel L3-modus in.
R2(conf-if-vl-10)#  vrrp-group 10
Stel VRRP-groeps-ID (VRID) in.
R2(conf-if-vl-10-vrid-10)#  virtual-address 10.10.10.1
Stel een virtueel IP-adres in voor de VRRP-router. 
R2(conf-if-vl-10-vrid-10)#  priority 150
(Optioneel) Stel prioriteit in voor de primaire verkiezing. De standaardwaarde is 100. Het hoogste getal heeft voorrang.  Bereik 1-255.
 

Als twee routers in een VRRP-groep tegelijkertijd worden weergegeven en dezelfde prioriteitswaarde hebben, worden de fysieke IP-adressen van de interface gebruikt als tiebreaker om te bepalen welke PRIMAIR is. De router met het hogere IP-adres wordt PRIMAIR.


Configuratie controleren

R1# show vrrp
Vlan 10, IPv4 VRID: 10, Version: 2, Net: 10.10.10.2
VRF: 0 default
State: Primary, Priority: 200, Primary: 10.10.10.3
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 2434, Gratuitous ARP sent: 24
Virtual MAC address:
 00:00:5e:00:01:0a
Virtual IP address:
 10.10.10.1
Authentication: (none)
 

R2# show vrrp

Vlan 10, IPv4 VRID: 10, Version: 2, Net: 10.10.10.3
VRF: 0 default
State: Backup, Priority: 150, Primary: 10.10.10.3
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 2434, Gratuitous ARP sent: 24
Virtual MAC address:
 00:00:5e:00:01:0a
Virtual IP address:
 10.10.10.1
Authentication: (none)
 

Article Properties


Affected Product
OS9, Force10 S25N-S50N, Force10 S25-01-GE-24T, Force10 S25-01-GE-24V, Force10 S50-01-GE-48T-V, Force10 S50-01-GE-48T, PowerSwitch S3048-ON, PowerSwitch S4048-ON, PowerSwitch S4810P, PowerSwitch S4810-ON, Force10 S50P, PowerSwitch S6000 , PowerSwitch S6000 ON, Force10 Z9000, Dell Networking Z9500, PowerSwitch S4048T-ON, PowerSwitch S6010-ON, PowerSwitch S6100-ON, PowerSwitch Z9100-ON ...
Last Published Date

07 Mar 2024

Version

5

Article Type

How To