PowerFlex：如何为安装在 Linux 上的 ScaleIO、VxFlexOS、PowerFlex 系统执行正常关机/开机
Summary: 如何为 ScaleIO、VxFlexOS、PowerFlex 系统执行正常关机/开机
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
以下过程概述了如何对 ScaleIO | VxFlexOS | PowerFlex 超融合系统执行正常关机/开机。
前提条件：
使用 (ScaleIO | VxFlexOS | PowerFlex) 存储的所有虚拟机均必须关闭。
关闭步骤：
- 验证客户端/SDC 活动：
ScaleIO-10-XX-XX-8:~ # scli --query_all_sdc MDM restricted SDC mode: Disabled Query all SDC returned 3 SDC nodes. SDC ID: bb292e1300000000 Name: ESX-10.XX.XX.33 IP: 9.YY.YY.33 State: Connected GUID: 9126907D-8830-44BC-8ECE-178852394E76 Read bandwidth: 0 IOPS 0 Bytes per-second Write bandwidth: 0 IOPS 0 Bytes per-second SDC ID: bb292e1400000001 Name: ESX-10.XX.XX.34 IP: 9.YY.YY.34 State: Connected GUID: 500D185D-E0F6-4257-9C24-65BCAAC5B50B Read bandwidth: 0 IOPS 0 Bytes per-second Write bandwidth: 0 IOPS 0 Bytes per-second SDC ID: bb29552300000002 Name: ESX-10.XX.XX.32 IP: 9.YY.YY.32 State: Connected GUID: CF3CA597-BD9A-46E5-A08F-F6BBB9433A83 Read bandwidth: 0 IOPS 0 Bytes per-second Write bandwidth: 0 IOPS 0 Bytes per-second
- 使用 CLI 或 GUI 验证系统运行状况：
CLI：
提醒：系统闲置的指示是零 IOPS/每秒零字节。
watch -n 1 "scli --query_all | grep 'capacity\|IOPS'"
Maximum capacity: Unlimited
24.5 TB (25087 GB) total capacity
15.8 TB (16157 GB) unused capacity
0 Bytes snapshots capacity
400.0 GB (409600 MB) in-use capacity
0 Bytes thin capacity
400.0 GB (409600 MB) protected capacity
0 Bytes failed capacity
0 Bytes degraded-failed capacity
0 Bytes degraded-healthy capacity
0 Bytes unreachable-unused capacity
0 Bytes active rebalance capacity
0 Bytes pending rebalance capacity
0 Bytes active fwd-rebuild capacity
0 Bytes pending fwd-rebuild capacity
0 Bytes active bck-rebuild capacity
0 Bytes pending bck-rebuild capacity
0 Bytes rebalance capacity
0 Bytes fwd-rebuild capacity
0 Bytes bck-rebuild capacity
0 Bytes active moving capacity
0 Bytes pending moving capacity
0 Bytes total moving capacity
8.3 TB (8529 GB) spare capacity
400.0 GB (409600 MB) at-rest capacity
0 Bytes decreased capacity
Primary-reads 0 IOPS 0 Bytes per-second
Primary-writes 0 IOPS 0 Bytes per-second
Secondary-reads 0 IOPS 0 Bytes per-second
Secondary-writes 0 IOPS 0 Bytes per-second
Backward-rebuild-reads 0 IOPS 0 Bytes per-second
Backward-rebuild-writes 0 IOPS 0 Bytes per-second
Forward-rebuild-reads 0 IOPS 0 Bytes per-second
Forward-rebuild-writes 0 IOPS 0 Bytes per-second
Rebalance-reads 0 IOPS 0 Bytes per-second
Rebalance-writes 0 IOPS 0 Bytes per-second
GUI：
此外，还可以在 GUI 中看到系统活动和数据可用性：
提醒：系统闲置且运行状况良好的指示是零 IOPS/每秒零字节且所有容量均受保护。
3.5+ 演示服务器
检查突出显示的区域，以确保 IOPS 为 0。 
- 使用 CLI 或 GUI 停用保护域：
提醒：停用保护域将导致所有 IOPS 停止（需要停机时间）。
CLI：
ScaleIO-10-xxx-xxx-8:~ # scli --inactivate_protection_domain --protection_domain_name PD00 All application IOs will not be serviced. Press 'y' to confirm. Protection Domain PD00 is being shutdown asynchronously Please wait for the operational state of the Protection Domain to become 'Inactive'
GUI：
右键单击保护域（在“Backed”部分）> 选择“Inactivate Protection Domain”。使用密码确认操作。
3.5+ 演示服务器：
单击保护域 -> 单击复选框以选择与正在关闭的系统关联的保护域。-> 单击“More”-> 单击“Inactivate”
通过输入密码来确认您要停用保护域 -> 单击“INACTIVATE”
- 验证保护域是否已停用：
ScaleIO-10-xx-xx-8:~ # scli --query_protection_domain --protection_domain_name PD00 | grep Oper Operational state is Inactive
- 以物理方式关闭所有节点/服务器。
开机步骤：
- 以物理方式打开所有服务器/节点的电源。
- 使用 CLI 或 GUI 验证系统运行状况，并确保所有 ScaleIO、VxFlexOS、PowerFlex 系统组件均已启动且正常运行：
SDS：
ScaleIO-10-xx-xx-8:~ # scli --query_all_sds Query-all-SDS returned 3 SDS nodes. Protection Domain 9d4a73f100000000 Name: PD00 SDS ID: a764dbaf00000002 Name: 10.xx.xx.32-ESX State: Connected, Joined IP: 9.YY.YY.132,9.ZZ.ZZ.132 Port: 7072 SDS ID: a764b4a000000001 Name: 10.xx.xx.34-ESX State: Connected, Joined IP: 9.YY.YY.134,9.ZZ.ZZ.134 Port: 7072 SDS ID: a764b49f00000000 Name: 10.xx.xx.33-ESX State: Connected, Joined IP: 9.YY.YY.133,9.ZZ.ZZ.133 Port: 7072
SDC：
ScaleIO-10-xx-xx-8:~ # scli --query_all_sdc MDM restricted SDC mode: Disabled Query all SDC returned 3 SDC nodes. SDC ID: bb292e1300000000 Name: ESX-10.xx.xx.33 IP: 9.yy.yy.33 State: Connected GUID: 9126907D-8830-44BC-8ECE-178852394E76 Read bandwidth: 0 IOPS 0 Bytes per-second Write bandwidth: 0 IOPS 0 Bytes per-second SDC ID: bb292e1400000001 Name: ESX-10.xx.xx.34 IP: 9.yy.yy.34 State: Connected GUID: 500D185D-E0F6-4257-9C24-65BCAAC5B50B Read bandwidth: 0 IOPS 0 Bytes per-second Write bandwidth: 0 IOPS 0 Bytes per-second SDC ID: bb29552300000002 Name: ESX-10.xx.xx.32 IP: 9.yy.yy.32 State: Connected GUID: CF3CA597-BD9A-46E5-A08F-F6BBB9433A83 Read bandwidth: 0 IOPS 0 Bytes per-second Write bandwidth: 0 IOPS 0 Bytes per-second
3.激活保护域：
CLI：
ScaleIO-10-xx-xx-8:~ # scli --activate_protection_domain --protection_domain_name PD00 Protection Domain PD00 is active
GUI：
右键单击保护域（在“Backed”部分）-> 选择“Activate Protection Domain”。使用密码确认操作。
3.5+ 演示服务器：
单击保护域 -> 单击复选框以选择与正在通电的系统关联的保护域。-> 单击“More”-> 单击“Activate”
- 验证保护域状态：
ScaleIO-10-xx-xx-8:~ # scli --query_protection_domain --protection_domain_name PD00 | grep -i Oper Operational state is Active
- 验证客户端/SDC 的连接状态，其中包括装载点/应用程序/服务。
Affected Products
PowerFlex SoftwareProducts
PowerFlex SoftwareArticle Properties
Article Number: 000157635
Article Type: How To
Last Modified: 13 Aug 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.