IDPA ESXi-opgradering mislykkes med fejlmeddelelsen "[Afhængighedsfejl] Filstien "/opt/lsi/perccli/libstorelib.so" hævdes af flere ikke-overliggende VIB'er"

Summary: Denne KB artikel gennemger et problem, der er påvist under IDPA-opgradering, hvor ESXi-opgraderingen ikke lykkes på grund af afhængighedsfejl.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms



Følgende fejl kan ses på ESXi-opgraderingsloggen på ACM på stien "/data01/tmp/patch/logs" :

6/03/20 17:23:16  main() Package name: IDPA-13G-ESXi-6.5.0-002
26/03/20 17:23:16  main() Executing install packages command: esxcli software profile update --depot=https://192.168.100.100:9443/dataprotection-upgrade/esxi_upgrade --profile=IDPA-13G-ESXi-6.5.0-002
26/03/20 17:23:19   run() Parsing returnCode, output: ['', "[DependencyError]\r\n File path of '/opt/lsi/perccli/libstorelib.so' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])\r\n File path of '/opt/lsi/perccli/perccli' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])\r\n Please refer to the log file for more details.", 'Status: 1']
26/03/20 17:23:19 run_cmd_esxi() Command: esxcli software profile update --depot=https://192.168.100.100:9443/dataprotection-upgrade/esxi_upgrade --profile=IDPA-13G-ESXi-6.5.0-002
26/03/20 17:23:19 run_cmd_esxi() [DependencyError]
26/03/20 17:23:19 run_cmd_esxi()  File path of '/opt/lsi/perccli/libstorelib.so' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])
26/03/20 17:23:19 run_cmd_esxi()  File path of '/opt/lsi/perccli/perccli' is claimed by multiple non-overlay VIBs: set(['LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01', 'LSI_bootbank_perccli_007.0127.0000.0000-2'])
26/03/20 17:23:19 run_cmd_esxi()  Please refer to the log file for more details.
26/03/20 17:23:19 run_cmd_esxi() Status: 1
26/03/20 17:23:19  main() Install packages command result: 1
26/03/20 17:23:19  main() Failed to install packages.

Cause

'vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01' VIB installeret på ESXi-værten er årsag til dette problem

Resolution

Trin 1. Kør SSH på den pågældende ESXi-vært.

Trin 2. Kør følgende kommando for at fjerne den uoverensstemmende VIB:
  • esxcli software vib remove --vibname vmware-perccli-007.0529.0000.0000
Eksempel på output:
[root@esx1:~]  esxcli software vib remove --vibname vmware-perccli-007.0529.0000.0000
Removal Result
Message: Operation finished successfully.
Reboot Required: false
VIBs Installed:
VIBs Removed: LSI_bootbank_vmware-perccli-007.0529.0000.0000_007.0529.0000.0000-01
VIBs Skipped:

Trin 3. Kontroller, at VIB blev fjernet:
  • esxcli software vib list|  grep -i perccli
Bemærk: Ovenstående kommando bør vise, at outputtet er tomt, hvis VIB blev fjernet. 

Trin 4: Prøv at udføre ESXi-opgraderingen igen fra ACM-brugergrænsefladen. 

Affected Products

Integrated Data Protection Appliance Family

Products

PowerProtect DP5300, PowerProtect DP5800, PowerProtect DP8300, PowerProtect DP8800, PowerProtect Data Protection Software, Integrated Data Protection Appliance Family, PowerProtect Data Protection Hardware , Integrated Data Protection Appliance Software ...
Article Properties
Article Number: 000173292
Article Type: Solution
Last Modified: 27 May 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.