NVP-vProxy: 無法透過即時存取至生產資料存放區,移轉復原的虛擬機器

Summary: 透過 NetWorker 執行的 VM 即時存取還原已成功完成,但是當 VM 有透過分散式交換器設定 NIC 時,VMware 儲存 vMotion 會失敗

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

  • VM 即時存取還原是使用 NetWorker VMware Protection (NVP) vProxy 應用裝置執行。
  • 復原成功完成,但使用 VMware Storage vMotion 將 VM 從 Data Domain 上的暫時 NFS 資料存放區遷移到永久資料存放區時發生錯誤。
  • VMware 報告中顯示的錯誤:
Invalid Configuration for device '##'

Cause

這不是 NetWorker 的問題。即時存取復原映射是原始虛擬機器及其組態的精確複本。  來源虛擬機器已連接至目標主機上的 VMware 中不存在的虛擬分散式交換器。目標主機上缺少虛擬分散式交換器,導致 vMotion 失敗。

Resolution

VMware KB:此超連結會帶您前往 Dell Technologies 以外的網站。 2102192 詳述下列因應措施: 

為避免發生此問題,在執行 Storage vMotion 之前,請編輯虛擬機器的設定,從分散式虛擬交換器中分離虛擬 NIC:

1。若要存取虛擬機器設定,請在 vSphere Web Client 的左窗格中選取虛擬機器。
2.按一下 「Manage 」標籤,然後按一下 「設定 」,然後按一下 「VM 硬體」。如果虛擬 NIC 附加到主機上不存在的分散式虛擬交換器,則附件視窗不會顯示任何資訊。
3.若要從非現有分散式虛擬交換器分離虛擬 NIC,請按一下網路配接卡,從功能表串聯 (例如 VM 網路) 選取替代選項。
4.按一下「OK」以儲存變更。

如果您在執行 Storage vMotion 時出現「裝置 13 無效組態」錯誤,請先中斷 NIC 的連線,再開始遷移。

Affected Products

NetWorker

Products

NetWorker
Article Properties
Article Number: 000174298
Article Type: Solution
Last Modified: 18 Sep 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.