Dell EMC Networking OS10 Sådan finder du ONIE-version fra Dell OS10 Kommandolinje

Summary: Sådan finder du switch ONIE-versionen fra OS10 ved hjælp af kommandolinjen.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Brug følgende kommando til at finde ONIE-versionen fra OS10 CLI. Du bliver muligvis bedt om at angive loginadgangskoden. 
system "sudo /mnt/onie-boot/onie/tools/bin/onie-version"
 

Syntaks

OS10# system "sudo /mnt/onie-boot/onie/tools/bin/onie-version"


Denne kommando viser detaljer om ONIE som version, platform, maskine.

 

Eksempel på output


image.png

Affected Products

SmartFabric OS10 Software
Article Properties
Article Number: 000193213
Article Type: How To
Last Modified: 04 Nov 2021
Version:  1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.