VxRail: Efter installation og/eller opgradering vil ESXi DCUI IP-adressen 0.0.0.0

Summary: Efter en installation og/eller opgradering vises vSphere DCUI IP-adressen som 0.0.0.0.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Efter en installation og/eller opgradering skal ESXi DCUI IP-adressen 0.0.0.0.

DCUI, der viser IP-adressenuller

Cause

ESXi-operativsystemet vælger som standard den statiske IP-adresse fra vmk0.

Resolution

Sådan løses problemet: 
  1. Sæt de berørte noder i vedligeholdelsestilstand
  2. Indstil den korrekte VMkernel-grænseflade og administrations-IP-adresse, kør:  
    # esxcfg-advcfg --set vmk2 /Net/ManagementIface
# esxcfg-advcfg --set <IP address> /Net/ManagementAddr
  3. Kontroller og bekræft, om de korrekte indstillinger findes i nedenstående filer:  
    /etc/vmware/esx.conf > look for line: /adv/Net/ManagementAddr
/bootbank/etc/vmware/esx.conf > look for line: /adv/Net/ManagementAddr
/altbootbank/etc/vmware/esx.conf > look for line: /adv/Net/ManagementAddr
  4. Kør auto-backup.sh og bekræft de samme indstillinger fra ovenstående filer
  5. Genstart værten
  6. Dobbelttjek problemet

Affected Products

Converged Infrastructure, Converged Systems, Hybrid Cloud Platforms, Hyper-converged Systems
Article Properties
Article Number: 000193940
Article Type: Solution
Last Modified: 05 Sep 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.