PowerEdge：STOR042 - 嘗試在 iDRAC9 中建立虛擬磁碟時，指定屬性錯誤不支援的值
Summary: 本文提供建立虛擬磁碟時STOR042錯誤的相關資訊。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
在建立 RAID 陣列期間，我們必須為虛擬磁碟新增 一個名稱 ：
範例：RAID 名稱
確認並「新增至待處理」工作後：
我們收到以下錯誤：
解決方案：
為避免發生錯誤，請命名虛擬磁碟，並避免在單字之間使用空格。範例：
「RAID_NAME」或「RAIDNAME」，因為不允許有空格。另一個選項是將名稱保留空白，並在建立虛擬磁碟後填入自動名稱。
範例：
注意：
- 自動名稱分配名稱，如下所示：虛擬磁碟 0、虛擬磁碟 1、虛擬磁碟 2...虛擬磁碟 n.」自動命名允許在其預配置的命名中使用空格。
- 此錯誤與 Lifecycle Controller 中的錯誤類似。移至 F2 > 裝置設定 > Dell PERC HXXXX 配接卡組態公用程式 > 組態管理 > 建立虛擬磁碟 > 虛擬磁碟名稱：
Additional Information
使用 iDRAC9 建立虛擬磁碟
持續時間：00：00：53 （小時：分鐘：秒）
當可用時，您可以使用此影像播放器上的 CC 圖示來選擇隱藏式輔助字幕 （字幕） 語言設定。
Affected Products
PowerEdge RAID Controller H345, PowerEdge RAID Controller H745, PowerEdge RAID Controller H750 Adapter SAS, PowerEdge RAID Controller H755 Front SASProducts
PowerEdge R240, PowerEdge R250, PowerEdge R260, PowerEdge R340, PowerEdge R350, PowerEdge R360, PowerEdge R440, PowerEdge R450, PowerEdge R540, PowerEdge R550, PowerEdge R640, PowerEdge R6415, PowerEdge R650, PowerEdge R650xs, PowerEdge R6515
, PowerEdge R6525, PowerEdge R660, PowerEdge R660xs, PowerEdge R6615, PowerEdge R6625, PowerEdge R670, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R760, PowerEdge R760XA, PowerEdge R760xd2, PowerEdge R760xs, PowerEdge R7615, PowerEdge R7625, PowerEdge R770, PowerEdge R840, PowerEdge R860, PowerEdge R940, PowerEdge R940xa, PowerEdge R960, PowerEdge T140, PowerEdge T150, PowerEdge T160, PowerEdge T340, PowerEdge T350, PowerEdge T360, PowerEdge T40, PowerEdge T440, PowerEdge T550, PowerEdge T560, PowerEdge T640
...
Article Properties
Article Number: 000199937
Article Type: How To
Last Modified: 16 Dec 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.