PowerEdge：STOR042 — 尝试在 IDRAC9 中创建虚拟磁盘时，指定属性的值不受支持错误
Summary: 本文提供有关创建虚拟磁盘时STOR042错误的信息。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
在创建 RAID 阵列期间，我们必须为虚拟磁盘添加 名称 ：
示例：RAID 名称
确认并“添加到待处理”作业后：
我们收到以下错误：
解决方案：
为了避免此错误，请命名虚拟磁盘并避免在单词之间使用空格。示例：
“RAID_NAME”或“RAIDNAME”，因为不允许使用空格。另一个选项是将名称留空，并在创建虚拟磁盘后使用 autoname填充它。
示例：
提醒：
- autoname 分配一个名称，如下所示：虚拟磁盘 0、虚拟磁盘 1、虚拟磁盘 2...Virtual Disk n.”Autoname 在其预配置的命名中允许使用空格。
- 该错误与 Lifecycle Controller 中的错误类似。转至 F2 > 设备设置 > Dell PERC HXXXX 适配器配置实用程序 > 配置管理 > 创建虚拟磁盘 > 虚拟磁盘名称：
Additional Information
使用 iDRAC9 创建虚拟磁盘
持续时间：00：00：53 （hh：mm：ss）
如果可用，可以使用此视频播放器上的 CC 图标选择隐藏式字幕（字幕）语言设置。
Affected Products
PowerEdge RAID Controller H345, PowerEdge RAID Controller H745, PowerEdge RAID Controller H750 Adapter SAS, PowerEdge RAID Controller H755 Front SASProducts
PowerEdge R240, PowerEdge R250, PowerEdge R260, PowerEdge R340, PowerEdge R350, PowerEdge R360, PowerEdge R440, PowerEdge R450, PowerEdge R540, PowerEdge R550, PowerEdge R640, PowerEdge R6415, PowerEdge R650, PowerEdge R650xs, PowerEdge R6515
, PowerEdge R6525, PowerEdge R660, PowerEdge R660xs, PowerEdge R6615, PowerEdge R6625, PowerEdge R670, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R760, PowerEdge R760XA, PowerEdge R760xd2, PowerEdge R760xs, PowerEdge R7615, PowerEdge R7625, PowerEdge R770, PowerEdge R840, PowerEdge R860, PowerEdge R940, PowerEdge R940xa, PowerEdge R960, PowerEdge T140, PowerEdge T150, PowerEdge T160, PowerEdge T340, PowerEdge T350, PowerEdge T360, PowerEdge T40, PowerEdge T440, PowerEdge T550, PowerEdge T560, PowerEdge T640
...
Article Properties
Article Number: 000199937
Article Type: How To
Last Modified: 16 Dec 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.