Dell Unity: No se puede crear un pool tradicional desde Unisphere O RAID 5 o 10 no está disponible cuando se crea un pool desde Unisphere
Summary: No se puede crear un pool tradicional desde la interfaz de usuario de Unity O RAID 5 o 10 no está disponible cuando se crea un pool desde la interfaz de usuario de Unity. (Corregible por el usuario) ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
En esta situación, el arreglo Unity ejecutaba OE 5.2 y todas las unidades SAS NL estaban presentes en el arreglo.
Cuando se intenta crear un pool desde Unisphere, solo está disponible RAID 6 (RAID 5 y RAID 10 no están disponibles).
Cuando se intenta crear un pool desde Unisphere, solo está disponible RAID 6 (RAID 5 y RAID 10 no están disponibles).
Cause
El arreglo Unity funciona según el diseño.
En Dell Unity OE versión 4.2 y superior, un pool dinámico es el único tipo de pool que se puede crear en Unisphere para un sistema todo flash. Además, esto se aplica a los sistemas híbridos que ejecutan OE versión 5.2 y posteriores. La creación de un pool tradicional requiere el uso de Unisphere CLI o API REST. Además, cuando se crea un Dynamic Pool con unidades NL-SAS, solo se permite RAID 6 cuando se utiliza Unisphere.
Para obtener más información, consulte:
En Dell Unity OE versión 4.2 y superior, un pool dinámico es el único tipo de pool que se puede crear en Unisphere para un sistema todo flash. Además, esto se aplica a los sistemas híbridos que ejecutan OE versión 5.2 y posteriores. La creación de un pool tradicional requiere el uso de Unisphere CLI o API REST. Además, cuando se crea un Dynamic Pool con unidades NL-SAS, solo se permite RAID 6 cuando se utiliza Unisphere.
Para obtener más información, consulte:
Resolution
Se puede crear un pool tradicional desde la CLI mediante los siguientes comandos
1) uemcli /stor/config/profile -traditional -configurable show <- Shows the profiles available in the system ID = tprofile_2 Type = Traditional Description = SAS Flash RAID5 (8+1) Drive type = SAS Flash RAID level = 5 Maximum capacity = 18510768046080 (16.8T) Stripe length = 9 Disk group = dg_26 Maximum drives to configure = 45 Maximum capacity to configure = 14834210439168 (13.4T)
2) uemcli /stor/config/dg show <- Shows the Disk Groups available in the system ID = dg_26 Drive type = SAS Flash 3 FAST Cache = no Drive size = 393846128640 (366.7G) Vendor size = 400.0G Rotational speed = 0 rpm Number of drives = 47 Unconfigured drives = 47 Capacity = 18510768046080 (16.8T) Recommended number of spares = 0
3) uemcli -d <IP Address> -u Local/admin -p <Password> /stor/config/pool create -name <Pool Name> -diskGroup dg_26 -drivesNumber 45 -storProfile tprofile_2 -type traditional <- Command to create a traditional Pool (we use 45 of the 47 drives to leave 2 for spares) Note: This command is run from a workstation with Unity uemcli installed. Alternately the command can be run directly on the SP via an SSH connection: uemcli -u Local/admin -p <Password> /stor/config/pool create -name <Pool Name> -diskGroup dg_26 -drivesNumber 45 -storProfile tprofile_2 -type traditional
Affected Products
Dell EMC Unity, Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity XT 380, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600
, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid
...
Article Properties
Article Number: 000201423
Article Type: Solution
Last Modified: 20 Dec 2024
Version: 8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.