PowerEdge: Sådan konfigureres Active Directory i IDRAC9 ved hjælp af RACADM

Summary: Følgende dokument indeholder et eksempel på, hvordan du konfigurerer Active Directory i IDRAC9 ved hjælp af RACADM-kommandoen.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Følgende trin kan udføres på en SSH-session til DRAC ved hjælp af lokal RACADM eller fjernbetjening RACADM.


Trin til prækonfiguration:

Kontrollér om AD nogensinde er blevet konfigureret. Dette er kun til reference for at få en idé om, hvad de konfigurerede eller måske har gået glip af. 

Hent Active Directory-oplysninger for at kontrollere, hvilke indstillinger der er placeret for domænecontrolleren og det globale katalog. 

racadm get IDRAC.ActiveDirectory.DomainController1
racadm get IDRAC.ActiveDirectory.DomainController2
racadm get IDRAC.ActiveDirectory.GlobalCatalog1
racadm get IDRAC.ActiveDirectory.GlobalCatalog2

Hent gruppeoplysninger, og kontroller, om der er konfigureret en Active Directory-gruppe.

racadm get IDRAC.ADGroup.1.Name
racadm get iDRAC.UserDomain.1
 

Konfigurationstrin:

Disse trin overskriver alle indstillinger, der blev fundet ovenfor. Eksempelkommandoerne har et eksempel på domænecontroller Computernavn " dc1.sysman.Local", som også er DNS/Global Catalog Server, ved hjælp af et eksempeldomæne "Sysman.local." I de fleste tilfælde er domænenavnet det samme som den globale katalogserver som DC-serveren.   

Konfigurere Active Directory-domæneoplysninger.

  1. Aktivér AD 
    /admin1-> racadm set IDRAC.ActiveDirectory.Enable 1
[Key=IDRAC.Embedded.1#ActiveDirectory.1]
Object value modified successfully
  2. Angiv DC; 
    /admin1-> racadm set IDRAC.ActiveDirectory.DomainController1 dc1.Sysman.local
[Key=IDRAC.Embedded.1#ActiveDirectory.1]
Object value modified successfully
  3.  Angiv globalt katalog 
    /admin1-> racadm set IDRAC.ActiveDirectory.GlobalCatalog1 dc1.Sysman.local
[Key=IDRAC.Embedded.1#ActiveDirectory.1]
Object value modified successfully
     

Konfigurer standardskema.

  1. Standardskemaindstilling 
    #racadm set iDRAC.ActiveDirectory.Schema 2 [Key=iDRAC.Embedded.1#ActiveDirectory.1] Object value modified successfully

Konfigurere standardskemaindstillinger (gruppe)

  1. Angiv gruppe fra AD 
    #racadm set IDRAC.ADGroup.1.Name "Domain Admins"
[Key=IDRAC.Embedded.1#ADGroup.1]
Object value modified successfully
  2. Angiv domæne for gruppe 
    #racadm set IDRAC.ADGroup.1.Domain Sysman.local
[Key=IDRAC.Embedded.1#ADGroup.1]
Object value modified successfully
  3. Indstil administratorrettighedsniveau 
    #racadm set iDRAC.ADGroup.1.Privilege 0x1ff
[Key=iDRAC.Embedded.1#ADGroup.1]
Object value modified successfully
     
     
  4. Indstil brugerdomæne (vises på login-hovedsiden) 
    #set iDRAC.userdomain.1.name sysman.local
[Key=iDRAC.Embedded.1#UserDomain.1]
Object value modified successfully

Yderligere indstilling: Certifikatvalidering

Hvis miljøet kræver et AD-certifikat:

/admin-> racadm -config -g cfgActiveDirectory -o cfgADCertValidationEnable 1

 

Mulige fejlscenarier:

  • IDRAC er på samme netværk som domænecontrolleren
  • Sørg for, at der findes en DNS-IP for DRAC-netværksindstillingerne (for at finde domænecontrolleren)
  • Registrer DRAC på DNS
  • Kør testen på DRAC-webbrugergrænsefladen under Katalogtjenester 
  • Gruppenavnet for brugeren i IDRAC AD-konfigurationen kræver samme brug af store bogstaver som gruppenavnet, som er angivet i Active Directory på domænecontrollerserveren.

Valgfrit:
Skift adgangskoden til rodkontoen, så brugerne kan udnytte AD-legitimationsoplysninger.

 

Affected Products

iDRAC9, iDRAC9 - 3.0x Series, iDRAC9 - 3.1x Series, iDRAC9 - 3.2x Series, iDRAC9 - 3.3x Series, iDRAC9 - 3.4x Series

Products

iDRAC9 - 4.xx Series, iDRAC9 - 5.xx Series, iDRAC9 - 6.xx Series, iDRAC9 - 7.xx Series, PowerEdge XR2, Poweredge C4140, PowerEdge C6400, PowerEdge C6420, PowerEdge C6520, PowerEdge C6525, PowerEdge C6600, PowerEdge C6615, PowerEdge C6620 , PowerEdge FC640, PowerEdge HS5610, PowerEdge HS5620, PowerEdge M640, PowerEdge M640 (for PE VRTX), PowerEdge MX5016s, PowerEdge MX7000, PowerEdge MX740C, PowerEdge MX750c, PowerEdge MX760c, PowerEdge MX840C, PowerEdge R240, PowerEdge R250, PowerEdge R260, PowerEdge R340, PowerEdge R350, PowerEdge R360, PowerEdge R440, PowerEdge R450, PowerEdge R540, PowerEdge R550, PowerEdge R640, PowerEdge R6415, PowerEdge R650, PowerEdge R650xs, PowerEdge R6515, PowerEdge R6525, PowerEdge R660, PowerEdge R660xs, PowerEdge R6615, PowerEdge R6625, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R760, PowerEdge R760XA, PowerEdge R760xd2, PowerEdge R760xs, PowerEdge R7615, PowerEdge R7625, PowerEdge R840, PowerEdge R860, PowerEdge R940, PowerEdge R940xa, PowerEdge R960, PowerEdge T140, PowerEdge T150, PowerEdge T160, PowerEdge T340, PowerEdge T350, PowerEdge T360, PowerEdge T40, PowerEdge T440, PowerEdge T550, PowerEdge T560, PowerEdge T640, PowerEdge XE2420, PowerEdge XE7100, PowerEdge XE7420, PowerEdge XE7440, PowerEdge XE8545, PowerEdge XE8640, PowerEdge XE9640, PowerEdge XE9680, PowerEdge XR11, PowerEdge XR12, PowerEdge XR4000r, PowerEdge XR4000w, PowerEdge XR4000z, PowerEdge XR4510c, PowerEdge XR4520c, PowerEdge XR5610, PowerEdge XR7620, PowerEdge XR8000r, PowerEdge XR8610t, PowerEdge XR8620t ...
Article Properties
Article Number: 000201671
Article Type: How To
Last Modified: 18 Feb 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.