PowerEdge：iDRAC UI 中的 Mellanox CX-6 NIC+RDMA 模式状态不正确
Summary: 使用 Mellanox CX-6 戴尔部件编号 （DPN） 的 PowerEdge 服务器：7TKND 卡可能会报告 iDRAC UI 上的“NIC+RDMA 模式”错误地显示“NIC、RDMA”。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
可以在 BIOS 系统设置配置页面中成功禁用和启用 NIC 和 RDMA 模式。
卡的分区 1 和分区 2 协议仍在 iDRAC UI 上显示 RDMA，如下所示：
Cause
问题的原因与 UI 相关。
UI 是问题的根本原因，导致 iDRAC UI 中的“NIC+RDMA 模式”状态显示不正确。
Resolution
- 不要更换硬件。
- 将 Mellanox 固件更新到最新版本。
Affected Products
Mellanox Family of Adapters, OEMR XL R570, OEMR XL R670, OEMR XL R770, OEMR XL R6715, OEMR XL R7715, OEMR XR4520c, Poweredge C4140, PowerEdge C6420, PowerEdge C6520, PowerEdge C6525, PowerEdge C6615, PowerEdge C6620, PowerEdge HS5610
, PowerEdge HS5620, PowerEdge R440, PowerEdge R450, PowerEdge R470, PowerEdge R540, PowerEdge R550, PowerEdge R570, PowerEdge R640, PowerEdge R650, PowerEdge R650xs, PowerEdge R6515, PowerEdge R6525, PowerEdge R660, PowerEdge R660xs, PowerEdge R6615, PowerEdge R6625, PowerEdge R670, PowerEdge R6715, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R760, PowerEdge R760XA, PowerEdge R760xd2, PowerEdge R760xs, PowerEdge R7615, PowerEdge R7625, PowerEdge R770, PowerEdge R7715, PowerEdge R840, PowerEdge R860, PowerEdge R940, PowerEdge R940xa, PowerEdge R960, PowerEdge T560, PowerEdge XE2420, PowerEdge XE7420, PowerEdge XE7440, PowerEdge XE8545, PowerEdge XE8640, PowerEdge XE9640, PowerEdge XE9680, PowerEdge XR11, PowerEdge XR12, PowerEdge XR4520c, PowerEdge XR5610, PowerEdge XR7620
...
Article Properties
Article Number: 000202125
Article Type: Solution
Last Modified: 27 Oct 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.