スリープまたはモダン スタンバイから復帰すると、Dell製デスクトップ コンピューターに黒い画面が表示される
Summary: この記事では、HDMIドングルを使用してモニターを接続し、PCがスリープまたはモダン スタンバイから再開したときに、Dell製デスクトップ コンピューターの画面が黒くなる問題について説明します。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
影響を受けるプラットフォーム:
- Precision 3260
- Precision 3460
- OptiPlex 7000
- OptiPlex 5000
- OptiPlex 3000
- OptiPlex XE4
- Vostro 3710
- Vostro 3910
- Inspiron 3910
Dell製デスクトップ コンピューターとモニターの間でDisplayPort - HDMIドングルを使用している場合、スリープ モードまたはモダン スタンバイから復帰したときにモニターにビデオが表示されないことがあります。
Cause
インテル グラフィック ファームウェアは、ドングル信号の遷移を処理しません。
Resolution
この件では、ハードウェアをディスパッチしないでください。
Dellはこの問題を認識しており、次のBIOSに修正が組み込まれています。
- Dell Precision 3260 BIOS v1.4.2以降
- Dell Precision 3460 BIOS v1.4.2以降
- OptiPlex 7000 BIOS v1.6.1以降
- OptiPlex 5000 BIOS v1.6.0以降
- OptiPlex 3000 BIOS v1.6.1以降
- OptiPlex XE4 BIOS v1.6.1以降
- Vostro 3710 BIOS v1.6.1以降
- Vostro 3910 BIOS v1.6.1以降
- Inspiron 3910 BIOS v1.6.1以降
Affected Products
Inspiron 3910, OptiPlex 3000 Tower, OptiPlex 3000 Micro, OptiPlex 3000 Small Form Factor, Optiplex 5000 Tower, OptiPlex 5000 Micro, OptiPlex 5000 Small Form Factor, OptiPlex 7000 Tower, OptiPlex 7000 Micro, OptiPlex 7000 Small Form Factor
, OptiPlex XE4, Precision 3260 Compact, Precision 3460 Small Form Factor, Vostro 3710, Vostro 3910
...
Article Properties
Article Number: 000202920
Article Type: Solution
Last Modified: 24 Apr 2025
Version: 8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.