PowerEdge: PERC11 또는 10 - HII 구성 유틸리티 및 iDRAC는 어레이 확장을 지원하지 않습니다.
Summary: PowerEdge RAID 컨트롤러(PERC11, PERC10), HII(Human Interface Infrastructure) 구성 유틸리티 및 iDRAC는 어레이 확장을 지원하지 않습니다.
Symptoms
디스크 그룹의 하드 드라이브가 더 큰 디스크로 교체되면 PERC HII 구성 유틸리티에서 '가상 디스크 확장' 옵션을 사용할 수 없습니다. 시스템 설정 -> PERC 설정 -> VD 작동 드롭다운 목록
그림 1: HII 구성 유틸리티--VD 작업
'디스크 용량 편집' 옵션은 iDRAC WebGUI-Storage>->"Virtual Disks" -> VD Actions 드롭다운 목록에서 사용할 수 있습니다.
그림 2: iDRAC 웹 GUI> 스토리지> 가상 디스크
"디스크 용량 편집"을 선택하면 "Available Space"에 0.00GB가 표시됩니다.
그림 3: iDRAC WebGUI->'Expand Virtual Disk Capacity' 페이지
"Capacity" 필드에 사용 가능한 최대 크기를 입력하여 가상 디스크 용량을 확장하려고 하면 작업이 실패합니다.
그림 4 : Job Queue Error message
기존 어레이에 사용 가능한 공간이 있는 경우 PERCCLI 유틸리티를 사용하여 확장합니다."PERCCLI /cx/vx show expansion"는 아래에 사용 가능한 공간을 보여줍니다. NoArrExp.
그림 5: PERCCLI 출력 NoArrExp
그러나 디스크 그룹의 하드 드라이브가 더 큰 디스크로 교체된 경우 사용 가능한 공간이 WithArrExp 의 출력 에서 "PERCCLI /cx/vx show expansion.그림 6:
PERCCLI 출력 WithArrExp
Cause
Resolution
Dell을 사용하여 어레이 용량 확장 PERCCLI 유틸리티:
-
1. Run "perccli /cx/vx show expansion" to determine the available expansion space. 2. Then run "perccli /cx/vx expand Size=<xx> expandarray" to perform the array expansion. The expand command will expand the virtual drive within the existing array if there is available space, or expand into additional capacity if the drives have been replaced with larger ones. The <xx> size value is specified in GB. If the "expandarray" option is specified, the full array capacity will be expanded. If this option is not specified, only the virtual drive capacity will be expanded rather than the full array.
모든 어레이 구성원을 더 큰 드라이브로 교체한 후 PERCCLI 유틸리티를 사용하면 기존 가상 디스크를 더 큰 크기로 확장할 수 있습니다.expandarray" 매개 변수.
이 동작은 PERC11 사용자 가이드의 'PowerEdge RAID 컨트롤러 11의 기능 -> 가상 디스크 재구성' 섹션
에도 설명되어 있습니다 https://www.dell.com/support/home/en-us/product-support/product/perc-h755/docs