ECS : REST n’est accessible sur aucun nœud du VDC : Impossible de lire un object-main_network.json valide après une nouvelle installation de la version 3.8
Summary: Après une nouvelle installation de la version 3.8 d’ECS, les clés SSH doivent être échangées entre les VDC. Les résultats peuvent être incomplets et signaler l’erreur « Impossible de lire un object-main_network.json valide » ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Commande svc_vdc list -d Affiche les erreurs et avertissements suivants :
admin@ecsnode1:~> svc_vdc list -d
svc_vdc v1.0.28 (svc_tools v2.10.0) Started 2023-02-28 08:06:28
WARNING Fabric node discovery failed. Results may be incomplete.
Error was: Unable to read a valid object-main_network.json
Name: VDC1
Local VDC: True
Serial #: CKM01224123456
ECS Release: 3.8.0.1 General Patch 1
Object Version: 3.8.0.1-138599.c85be50ba8f.1
VDC ID: urn:storageos:VirtualDataCenterData:75bdc6b5-8d47-4e16-8fcf-c81565123456
Short form VDC ID: 75bdc6b5-8d47-4e16-8fcf-c81565123456
Secret Key: ***
TSO Status: Healthy
Permanently failed: False
Encryption Enabled: True
Storage pools (cos):
SP02 urn:storageos:VirtualArray:31f01234-7e8e-4c7e-873c-69b012345678
Node managementEndPoints interVdcCmdEndPoints interVdcEndPoints
r1n1 10.x.x.x 10.x.x.x 10.x.x.x
r1n2 10.x.x.x 10.x.x.x 10.x.x.x
r1n3 10.x.x.x 10.x.x.x 10.x.x.x
r1n4 10.x.x.x 10.x.x.x 10.x.x.x
r1n5 10.x.x.x 10.x.x.x 10.x.x.x
ERROR REST is not reachable on any node on vdc 'VDC2'.
ERROR Unexpected fatal error while running REST command.
Name: VDC2
Local VDC: False
Serial #: Unknown
Object Version: None
VDC ID: urn:storageos:VirtualDataCenterData:4a798bac-f41a-4896-846f-3b1234567890
Short form VDC ID: 4a798bac-f41a-4896-846f-3b1234567890
Secret Key: ***
TSO Status: Healthy
Permanently failed: False
Encryption Enabled: True
[Could not determine storage pool info]
Node managementEndPoints interVdcCmdEndPoints interVdcEndPoints
<Unknown>* 10.x.x.x 10.x.x.x 10.x.x.x
<Unknown>* 10.x.x.x 10.x.x.x 10.x.x.x
<Unknown>* 10.x.x.x 10.x.x.x 10.x.x.x
<Unknown>* 10.x.x.x 10.x.x.x 10.x.x.x
<Unknown>* 10.x.x.x 10.x.x.x 10.x.x.x
* - Unknown nodes indicate either node IPs couldn't be discovered, or endpoints are misconfigured
NOTE: For a full list of network IPs/interfaces, use 'svc_network list' (local) or 'svc_network list -r' (all vdcs)
En outre, lors de l’utilisation de SSH sur des nœuds VDC distants, un mot de passe est demandé :
admin@ecsnode1:~> ssh 10.x.x.x
Password: Cause
Après une nouvelle installation d’ECS 3.8, les clés SSH doivent être synchronisées entre les VDC.
Resolution
Si les symptômes ci-dessus se produisent, ouvrez un dossier d’incident auprès de Dell et consultez cet article de la base de connaissances.
Affected Products
ECSProducts
ECS Appliance, Elastic Cloud StorageArticle Properties
Article Number: 000210252
Article Type: Solution
Last Modified: 25 Nov 2024
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.