Data Domain: How to Disable SNMP Agent in iDRAC for DD3300, DD6400, DD6900, DD9400, and DD9900

Summary: This article explains how to disable the SNMP Agent in iDRAC for DD3300, DD6400, DD6900, DD9400, and DD9900 systems.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Steps

  1. In a web browser, type the iDRAC IP address specified during iDRAC configuration.
  2. Log in with the credentials creates for iDRAC account.
  3. Go to iDRAC Settings > Services > SNMP Agent.
  4. From the drop-down, select Disable and Apply.
NOTE: The change is instantaneous, and no reboot or restart is required.
 
NOTE: In future DDOS releases, this may be disabled by default and persistent after reboots and upgrades.
 
Screenshot of iDRAC Settings to disable SNMP Agent.
Figure 1: Screenshot of iDRAC Settings to disable SNMP Agent.

Affected Products

Data Domain
Article Properties
Article Number: 000219718
Article Type: How To
Last Modified: 01 Dec 2023
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.