PowerEdge：启用三个分区时，Marvell QL41262链路速度在 iDRAC9 UI 中显示为“未知”
Summary: iDRAC 版本 6.10.00.00 及更高版本，当 Dell Marvell QL41262 适配器上启用了 4 个分区中的 3 个时，iDRAC 用户界面会将链路速度显示为“未知”。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
在 iDRAC 用户界面 （UI） 中查看网络接口控制器 （NIC） 信息时，QL41262显示“未知”链路速度。禁用的第四个分区也可以显示为“Up”。
Cause
这只是装饰，对链路速度或 NIC 功能没有影响。
Resolution
已在 iDRAC 版本 7.10.30.00
中修复解决方法：
在 QL41262 适配器上启用第四个分区。
将 iDRAC 降级到低于 6.10.00.00 的版本
中修复解决方法：
在 QL41262 适配器上启用第四个分区。
将 iDRAC 降级到低于 6.10.00.00 的版本
Affected Products
PowerEdge C6420, PowerEdge C6520, PowerEdge C6525, PowerEdge M630, PowerEdge M640, PowerEdge MX7000, PowerEdge R640, PowerEdge R650, PowerEdge R660, PowerEdge R740, PowerEdge R740XD, PowerEdge R750, PowerEdge R750XA, PowerEdge R7525, PowerEdge R760
, PowerEdge R760XA, PowerEdge R7625, PowerEdge R940, PowerEdge T350, PowerEdge T360, PowerEdge T440, PowerEdge T550, PowerEdge T560, PowerEdge T640, QLogic Family of Adapters
...
Article Properties
Article Number: 000220343
Article Type: Solution
Last Modified: 25 Mar 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.