VxBlock: Problema da Cisco CSCwh11744 – O serviço ACLTCAM relata falha e recarrega o switch

Summary: Problema da Cisco CSCwh11744 – O serviço ACLTCAM relata uma falha e carrega o switch novamente.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

O switch com o recurso N-Port Identifier Virtualization (NPIV) habilitado é recarregado com falha ACLTCAM ao trazer o port channel UP conectado ao switch N-Port Virtualizer (NPV). 
show system reset-reason

----- reset reason for module 1 (from Supervisor in slot 1) ---
1) At 439618 usecs after Tue Aug 8 12:38:22 2023
Reason: Reset triggered due to HA policy of Reset
Service: acltcam hap reset
Version: 8.4(2e)

Cause

Problema conhecido no firmware 8.4(2e)

Resolution

Solução alternativa:
Aumente cada membro do port channel, um por um.

Additional Information

Consulte Cisco CSCwh11744: Ferramenta de pesquisa de problemas (cisco.com) (Link externo) 

Affected Products

VxBlock System 1000
Article Properties
Article Number: 000221106
Article Type: Solution
Last Modified: 30 Dec 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.