VxBlock：Cisco 問題 CSCwh11744 - ACLTCAM 服務報告當機並重新載入交換器

Summary: Cisco 問題 CSCwh11744 - ACLTCAM 服務報告當機並再次載入交換器。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

啟用 N 連接埠識別符虛擬化 （NPIV） 功能的交換器會在啟動連接埠通道與 N 連接埠虛擬器 （NPV） 交換器時當機，在發生 ACLTCAM 當機時重新載入。 
show system reset-reason

----- reset reason for module 1 (from Supervisor in slot 1) ---
1) At 439618 usecs after Tue Aug 8 12:38:22 2023
Reason: Reset triggered due to HA policy of Reset
Service: acltcam hap reset
Version: 8.4(2e)

Cause

8.4（2e） 韌體的已知問題

Resolution

因應措施：
逐個啟動連接埠通道的每個成員。

Additional Information

請參閱 Cisco CSCwh11744：問題搜尋工具 （cisco.com） （外部連結） 

Affected Products

VxBlock System 1000
Article Properties
Article Number: 000221106
Article Type: Solution
Last Modified: 30 Dec 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.