MDS 시스템에 대한 Add Existing Resource Group 마법사에서 PowerFlex 4.X 오류 발생

Summary: PowerFlex MDS(Management Data Store) 시스템에 대한 기존 리소스 그룹 마법사 추가를 완료할 수 없습니다.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

시나리오

PowerFlex MDS 시스템은 수동으로 구축되었으며 PFxM에서 리소스 그룹으로 수집할 준비가 되었습니다.

증상

하나 이상의 네트워크 개체를 예약할 수 없음을 보여 주는 스크린샷: (VXFM00157)

VXFM00157 
VXFM00157 

Cause

영향

MDS 시스템을 리소스 그룹으로 수집할 수 없습니다. 

근본 원인

HCI 환경에서 vCenter가 PFxM 인벤토리에 추가되었습니다. PFxM은 vCenter 스위치를 사용하여 마법사에서 항목을 생성합니다. 이러한 항목은 vSwitch에서 파생된 드롭다운 네트워크 개체로 구성됩니다. vCenter에 PowerFlex MDS 시스템과 관련이 없는 추가 네트워크 포트 그룹이 포함된 경우 이러한 포트 그룹은 마법사에서 선택 가능한 항목으로 통합됩니다. 마법사의 이러한 추가 항목이 PFxM 네트워크 개체에 매핑되면 위에서 언급한 오류가 발생할 수 있습니다.

이 시나리오에서 flex-oobflex-data1 네트워크 객체는 MDS 시스템이 아닌 운영 PowerFlex 시스템과 관련이 있습니다. 이러한 차이로 인해 네트워크 개체를 예약할 수 없음을 나타내는 오류가 관찰됩니다.

 

Resolution

해결 방법

마법사에서 드롭다운 네트워크를 연결할 때 MDS 시스템과 관련된 항목만 사용되도록 합니다. 마법사에 추가 항목이 있는 경우 관련 없는 항목은 선택하지 않은 상태로 둡니다.

영향을 받는 버전

PowerFlex Manager 4.x

수정된 버전

해당 없음 - 설계된 대로 작동

Affected Products

PowerFlex appliance R650, PowerFlex appliance R6525, PowerFlex appliance R640

Products

PowerFlex rack, VxFlex Ready Nodes, PowerFlex custom node, ScaleIO, PowerFlex appliance R660, PowerFlex appliance R6625, Powerflex appliance R750, PowerFlex appliance R760, PowerFlex appliance R7625, PowerFlex appliance R740XD , PowerFlex appliance R7525, PowerFlex appliance R840 ...
Article Properties
Article Number: 000221805
Article Type: Solution
Last Modified: 17 Jun 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.