Dell Networking OS10 How to disable and enable console logging

Summary: This article explains how to disable and enable console logging in Dell Networking OS10.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

By Default, Console logging is enabled in Dell OS10 switches. This means that the messages are displayed on the physical console of the device.
Users who are physically connected to the router or switch can view these messages directly. Console logging is useful for real-time monitoring and debugging.
Sometimes during troubleshooting sessions, console logging might be distracting. It may also consume more CPU. In such cases we can safely turn off console logging.
Use the bellow command to disable Console logging.
DELLOS10# configure terminal
DELLOS10(config)# logging console disable 

To enable Console logging use bellow command.
DELLOS10# configure terminal
DELLOS10(config)# logging console enable 

Affected Products

Dell Networking Z9500, PowerSwitch E3200-ON Series, Dell EMC Networking N3200-ON, PowerSwitch S4112F-ON/S4112T-ON, PowerSwitch S4128F-ON/S4128T-ON, PowerSwitch S4148F-ON/S4148T-ON/S4148FE-ON, PowerSwitch S4148U-ON, PowerSwitch S5212F-ON , PowerSwitch S5224F-ON, PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch Z9100-ON, PowerSwitch Z9264F-ON, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON, PowerScale Switch S4112F, PowerScale Switch S4148F, PowerScale Switch S5232F, PowerScale Switch Z9100, PowerScale Switch Z9264, SmartFabric OS10 Software ...
Article Properties
Article Number: 000223141
Article Type: How To
Last Modified: 15 Mar 2024
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.