PowerScale: Sådan kontrolleres klyngens tilstand og uløste hændelser
Summary: Sådan kontrolleres klyngens tilstand og uløste hændelser.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Sådan kontrollerer du klyngens tilstand:
- Åbn en SSH -forbindelse på en hvilken som helst node i klyngen, og log ind ved hjælp af "root"-kontoen.
- Kør følgende kommando
# isi status Cluster Name: Test Cluster Health: [ OK ] Storage Efficiency: 0.83 : 1 Cluster Storage: HDD SSD Storage Size: 344.4G (469.8G Raw) 0 (0 Raw) VHS Size: 125.4G Used: 18.5G (5%) 0 (n/a) Avail: 325.9G (95%) 0 (n/a) Health Throughput (bps) HDD Storage SSD Storage ID |IP Address |DASR | In Out Total| Used / Size |Used / Size ---+---------------+-----+-----+-----+-----+-----------------+----------------- 1|10.xxx.x.xx | OK | 0| 132k| 132k| 3.3G/57.4G( 6%)|(No Storage SSDs) 2|10.xxx.x.xx | OK | 0| 714k| 714k| 3.3G/57.4G( 6%)|(No Storage SSDs) 3|10.xxx.x.xx | OK | 0| 0| 0| 2.6G/57.4G( 5%)|(No Storage SSDs) ---+---------------+-----+-----+-----+-----+-----------------+----------------- Cluster Totals: | 0| 1.9M| 1.9M|18.5G/ 344G( 5%)|(No Storage SSDs) Health Fields: D = Down, A = Attention, S = Smartfailed, R = Read-Only Critical Events: Time LNN Event --------------- ---- -------------------------------------------------------
Fra ovenstående output ser vi, at klyngetilstanden: [OK] er god, og der er heller ingen udestående kritiske begivenheder.
Hvis du vil kontrollere, om der er udestående advarsler for hele klyngen, kan du køre nedenstående kommando.
# isi event groups list --resolved=false ID Started Ended Causes Short Lnn Events Severity --------------------------------------------------------------------- 3072 12/17 00:55 -- QUOTA_INTERNAL_ERROR 1 9 warning 4105 12/20 01:11 -- QUOTA_NOTIFY_FAILED 3 6 information ---------------------------------------------------------------------
For at rydde en bestemt begivenhed.
# isi event groups modify --resolved=yes --ignore=yes --id=<Group ID from above command > Eg : isi event groups modify --resolved=yes --ignore=yes --id=3072
For at rydde alle de gamle advarsler for hele klyngen.
For OneFS 7.x.x.x and Above
# isi events cancel all
# isi events quiet all
For OneFS 8.x.x.x and above
# isi event bulk --ignore=true
# isi event bulk --resolved=true
Affected Products
Isilon, PowerScale OneFSArticle Properties
Article Number: 000223412
Article Type: How To
Last Modified: 22 Mar 2024
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.