PowerStore：节点在连接空 NVMe 机柜的情况下重新启动
Summary: 当确定已连接空的 NVMe 机柜时，软件问题可能会导致节点重新启动。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
在具有空 NVMe 机柜的设备上，任一节点可能会间歇性重新启动。
Cause
空存储模块的过多轮询可能会导致节点重新启动。
Resolution
此问题已在 PowerStoreOS v4.1.0.0 中得到解决。
为避免此问题，请勿将空的 NVMe 机柜连接到设备。
如果连接了空机柜，请向其添加驱动器。
4.1.0.0 发行说明参考：MDT-600475
Affected Products
PowerStoreArticle Properties
Article Number: 000224925
Article Type: Solution
Last Modified: 10 Apr 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.