VxRail: vMotion mislykkes med fejlen "Der opstod en generel systemfejl: Ugyldig fejl"

vMotion mislykkes ved migrering til en eller flere bestemte værter.
Der er konfigureret nok vMotion VMkernel-porte til at pinge.

Følgende fejl vises, når vMotion forsøges: 

A general system error occurred: Invalid fault

 The vMotion failed because the destination host did not receive data from the source host on the vMotion network. Please check your vMotion network settings and physical network configuration and ensure they are correct

vmware.log

2024-05-21T16:58:32.347Z In(05) vmx - [msg.checkpoint.migration.nodata] The vMotion failed because the destination host did not receive data from the source host on the vMotion network.  Please check your vMotion network settings and physical network configuration and ensure they are correct.
2024-05-21T16:58:32.347Z In(05) vmx - Migrate: cleaning up migration state.
2024-05-21T16:58:32.347Z In(05) vmx - VigorTransport_ServerSendResponse opID=lw189jgb-62232-auto-1c0p-h5:70028930-8b-01-fe-39c9 seq=6: Completed Bootstrap request with messages.
2024-05-21T16:58:32.347Z In(05) vmx - Migrate: Final status reported through Vigor.
2024-05-21T16:58:32.347Z In(05) vmx - MigrateSetState: Transitioning from state 12 to 0.
2024-05-21T16:58:32.347Z In(05) vmx - Msg_Post: Error
2024-05-21T16:58:32.347Z In(05) vmx - [msg.checkpoint.migration.nodata] The vMotion failed because the destination host did not receive data from the source host on the vMotion network.  Please check your vMotion network settings and physical network configuration and ensure they are correct.

Kilde-VM ESXi hostd.log:

2024-05-21T16:56:37.835Z info hostd[2100617] [Originator@6876 sub=Vcsvc.VMotionSrc.7107587418190845405 opID=lw189jgb-62050-auto-1bvn-h5:70028810-9c-01-f0-63dc] ResolveCb: VMX reports needsUnregister = false for migrateType MIGRATE_TYPE_VMOTION
2024-05-21T16:56:37.835Z info hostd[2100617] [Originator@6876 sub=Vcsvc.VMotionSrc.7107587418190845405 opID=lw189jgb-62050-auto-1bvn-h5:70028810-9c-01-f0-63dc] ResolveCb: Failed with fault: (vim.fault.GenericVmConfigFault) {
-->    faultMessage = (vmodl.LocalizableMessage) [
-->       (vmodl.LocalizableMessage) {
-->          key = "msg.checkpoint.init.migration.failure",
-->          arg = (vmodl.KeyAnyValue) [
-->             (vmodl.KeyAnyValue) {
-->                key = "1",
-->                value = "195887136"
-->             },
-->             (vmodl.KeyAnyValue) {
-->                key = "2",
-->                value = "Not supported"
-->             }
-->          ],
-->          message = "Failed to initialize migration at source.  Error 0xbad0020.  Not supported."
-->       }
-->    ],
-->    reason = "Failed to initialize migration at source.  Error 0xbad0020.  Not supported.",
-->    msg = "Failed to initialize migration at source.  Error 0xbad0020.  Not supported.

Destinations-VM ESXi Hostd.log:

2024-05-21T16:58:32.348Z info hostd[2109598] [Originator@6876 sub=Vcsvc.VMotionDst.7107587418190845405 opID=lw189jgb-62232-auto-1c0p-h5:70028930-8b-01-fe-39c9] ResolveCb: VMX reports needsUnregister = true for migrateType MIGRATE_TYPE_VMOTION
2024-05-21T16:58:32.348Z info hostd[2109598] [Originator@6876 sub=Vcsvc.VMotionDst.7107587418190845405 opID=lw189jgb-62232-auto-1c0p-h5:70028930-8b-01-fe-39c9] ResolveCb: Failed with fault: (vim.fault.GenericVmConfigFault) {
-->    faultMessage = (vmodl.LocalizableMessage) [
-->       (vmodl.LocalizableMessage) {
-->          key = "msg.checkpoint.migration.nodata",
-->          message = "The vMotion failed because the destination host did not receive data from the source host on the vMotion network.  Please check your vMotion network settings and physical network configuration and ensure they are
correct.",

1. Slut vSphere- eller VMware Infrastructure Client til din vCenter-server.

2. Vælg ESXi-værten.

3. Vælg fanen Konfiguration.

4. Vælg Avancerede indstillinger under Software.

5. Vælg Migrer, og skift Migrate.Enabled til 0.

6. Vælg OK, og luk.

7. Vælg Avancerede indstillinger.

8. Vælg Migrer, og skift Migrate.Enabled til 1.

9. Vælg OK og derefter Luk.

Bemærk: Hvis du ser fejlen "Invalid parameter" efter nulstilling af "Migrate.Enabled" til 1, skal du se Udførelse af en vMotion eller tilføjelse af et netværkskort til en virtuel maskine mislykkes med fejlen: Det nødvendige modul er ikke indlæst. (2013128)

Hvis disse trin ikke løser problemet, kan du prøve at øge timeout for migreringsnetværkshandlinger efter trin 4 ovenfor. Gå derefter til de resterende trin. Sørg for at gentage disse trin på destinationsværten.
Sådan øges timeout for migreringsnetværkshandlinger:

1. Vælg fanen Konfiguration.

2. Vælg Avancerede indstillinger under Softwareoverførsel>.

3. Skift Migrate.NetTimeout til 60s. Standardværdien er 20s.

4. Vælg OK og derefter Luk.