VxRail: vMotion falla con el error "Se produjo un error general del sistema: Falla no válida"

vMotion falla cuando se migra a uno o varios hosts específicos.
Hay suficientes puertos VMkernel de vMotion configurados y pueden hacer ping correctamente.

Se observan los siguientes errores cuando se intenta ejecutar vMotion: 

A general system error occurred: Invalid fault

 The vMotion failed because the destination host did not receive data from the source host on the vMotion network. Please check your vMotion network settings and physical network configuration and ensure they are correct

vmware.log

2024-05-21T16:58:32.347Z In(05) vmx - [msg.checkpoint.migration.nodata] The vMotion failed because the destination host did not receive data from the source host on the vMotion network.  Please check your vMotion network settings and physical network configuration and ensure they are correct.
2024-05-21T16:58:32.347Z In(05) vmx - Migrate: cleaning up migration state.
2024-05-21T16:58:32.347Z In(05) vmx - VigorTransport_ServerSendResponse opID=lw189jgb-62232-auto-1c0p-h5:70028930-8b-01-fe-39c9 seq=6: Completed Bootstrap request with messages.
2024-05-21T16:58:32.347Z In(05) vmx - Migrate: Final status reported through Vigor.
2024-05-21T16:58:32.347Z In(05) vmx - MigrateSetState: Transitioning from state 12 to 0.
2024-05-21T16:58:32.347Z In(05) vmx - Msg_Post: Error
2024-05-21T16:58:32.347Z In(05) vmx - [msg.checkpoint.migration.nodata] The vMotion failed because the destination host did not receive data from the source host on the vMotion network.  Please check your vMotion network settings and physical network configuration and ensure they are correct.

VM de origen hostd.log ESXi:

2024-05-21T16:56:37.835Z info hostd[2100617] [Originator@6876 sub=Vcsvc.VMotionSrc.7107587418190845405 opID=lw189jgb-62050-auto-1bvn-h5:70028810-9c-01-f0-63dc] ResolveCb: VMX reports needsUnregister = false for migrateType MIGRATE_TYPE_VMOTION
2024-05-21T16:56:37.835Z info hostd[2100617] [Originator@6876 sub=Vcsvc.VMotionSrc.7107587418190845405 opID=lw189jgb-62050-auto-1bvn-h5:70028810-9c-01-f0-63dc] ResolveCb: Failed with fault: (vim.fault.GenericVmConfigFault) {
-->    faultMessage = (vmodl.LocalizableMessage) [
-->       (vmodl.LocalizableMessage) {
-->          key = "msg.checkpoint.init.migration.failure",
-->          arg = (vmodl.KeyAnyValue) [
-->             (vmodl.KeyAnyValue) {
-->                key = "1",
-->                value = "195887136"
-->             },
-->             (vmodl.KeyAnyValue) {
-->                key = "2",
-->                value = "Not supported"
-->             }
-->          ],
-->          message = "Failed to initialize migration at source.  Error 0xbad0020.  Not supported."
-->       }
-->    ],
-->    reason = "Failed to initialize migration at source.  Error 0xbad0020.  Not supported.",
-->    msg = "Failed to initialize migration at source.  Error 0xbad0020.  Not supported.

VM de destino Hostd.log ESXi:

2024-05-21T16:58:32.348Z info hostd[2109598] [Originator@6876 sub=Vcsvc.VMotionDst.7107587418190845405 opID=lw189jgb-62232-auto-1c0p-h5:70028930-8b-01-fe-39c9] ResolveCb: VMX reports needsUnregister = true for migrateType MIGRATE_TYPE_VMOTION
2024-05-21T16:58:32.348Z info hostd[2109598] [Originator@6876 sub=Vcsvc.VMotionDst.7107587418190845405 opID=lw189jgb-62232-auto-1c0p-h5:70028930-8b-01-fe-39c9] ResolveCb: Failed with fault: (vim.fault.GenericVmConfigFault) {
-->    faultMessage = (vmodl.LocalizableMessage) [
-->       (vmodl.LocalizableMessage) {
-->          key = "msg.checkpoint.migration.nodata",
-->          message = "The vMotion failed because the destination host did not receive data from the source host on the vMotion network.  Please check your vMotion network settings and physical network configuration and ensure they are
correct.",

1. Conecte vSphere o VMware Infrastructure Client a vCenter Server.

2. Seleccione el host ESXi.

3. Seleccione la pestaña Configuration.

4. Seleccione Advanced Settings en Software.

5. Seleccione Migrate y cambie Migrate.Enabled a 0.

6. Seleccione Aceptar y cerrar.

7. Seleccione Advanced Settings.

8. Seleccione Migrate y cambie Migrate.Enabled a 1.

9. Seleccione OK y, a continuación, Close.

Nota: Si ve el error de parámetro no válido después de restablecer "Migrate.Enabled" a 1, consulte La ejecución de vMotion o la adición de una tarjeta de red a una máquina virtual fallan con el siguiente error: El módulo necesario no está cargado. (2013128)

Si estos pasos no resuelven el problema, intente aumentar el tiempo de espera para las operaciones de red de migración después del paso 4 anterior. A continuación, continúe con los pasos restantes. Asegúrese de repetir estos pasos en el host de destino.
Para aumentar el tiempo de espera de las operaciones de migración de la red:

1. Seleccione la pestaña Configuration.

2. Seleccione Advanced Settings en Software > Migrate.

3. Cambie Migrate.NetTimeout a 60s. El valor predeterminado es 20s.

4. Seleccione OK y, a continuación, Close.