VxRail: Implementatie mislukt met Kan niet-vSAN-schijven op host niet configureren

Summary: Kan niet-vSAN of onbeheerde schijven op de host niet configureren.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

VxRail implementatie mislukt met fout:
Afbeelding van de fout met de VxRail implementatiewizard

 

Dayone.log:

"2024-06-04 04:57:43,992" microservice.do-host "2024-06-04T04:57:43.306854319Z stderr F 2024-06-04 04:57:43,306 [ERROR] <Dummy-9:139912387842120> http_client.py get() (53): failed to GET https://0.0.144.80:9090/rest/ps/private/v1/hwinventory with error: ('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer'))"
"2024-06-04 04:57:43,992" microservice.do-host "2024-06-04T04:57:43.306960272Z stderr F 2024-06-04 04:57:43,306 [WARNING] <Dummy-9:139912387842120> utils.py call() (213): Retryed 57 times, spending 285.3580 seconds, raise ConnectionError(ProtocolError('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer')),) error"

"2024-06-04 04:57:58,981" microservice.storage-service "2024-06-04T04:57:58.323242867Z stdout F common.nano_exception.NanoException: {""code"": ""E3100_Storage_10"", ""params"": [""servervxr001.domain""], ""message"": ""Failed to configure non-vSAN or unmanaged disks on host servervxr001.domain""}"

De host had geen IP-adres bij het uitvoeren van de onderstaande opdracht:

esxcli network ip connection list | grep 9090

example output: 
tcp         0       0  :: 9090                 0.0.0.0:0            LISTEN        2103568  newreno  python

Geprobeerd het onderstaande bestand te wijzigen en het IP-adres van vmk2 toe te voegen en vervolgens de platformservice opnieuw op te starten.

/etc/config/vxrail/platform.conf

Start de service opnieuw "vxrail-pservice" en het zou nu moeten luisteren op het IP-adres en de poort.

Voer vanuit de VxRail Manager de volgende opdracht uit:

curl -vk --user root:Passw0rd! https://IPADDRESS:9090/rest/ps/private/v1/hwinventory | jq

Mogelijk ziet u een vergelijkbaar antwoord "Verbinding opnieuw ingesteld door peer"-berichten.

 

Cause

Poort 9090 wordt geblokkeerd door een interne firewall van de klant.

 

Resolution

Om dit probleem op te lossen, deblokkeert u de blokkering van poort 9090 op de firewall.
Het eerste knooppunt in het cluster moet mogelijk RASR zijn om de implementatie opnieuw te starten.

 

Affected Products

VxRail Appliance Family, VxRail Appliance Series, VxRail Software
Article Properties
Article Number: 000226490
Article Type: Solution
Last Modified: 08 Sep 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.