VCF on VxRail: Using sas3ircu tool to identify failed disk slot from ESXi CLI
Summary: Using sas3ircu tool to identify failed disk slot from ESXi CLI
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
1-SSH using putty to ESXi node
2-Run below command
2-Run below command
/opt/vxrail/tools/sas3ircu_esx6_native 0 display3-Output should be similar to below
Device is a Hard disk
Enclosure # : 2
Slot # : 2
SAS Address : 500056b-3-3749-48c2
State : Ready (RDY)
Size (in MB)/(in sectors) : 3662830/7501476527
Manufacturer : ATA
Model Number : SSDSC2KB038T8R
Firmware Revision : DL63
Serial No : XXXX
Unit Serial No(VPD) : XXXX
GUID : 55cd2e4150d5a0c4
Protocol : SATA
Drive Type : SATA_SSD 4-Output showing Enclosure number and Slot numberAffected Products
VMWare Cloud on Dell EMC VxRail E560F, VMWare Cloud on Dell EMC VxRail E560N, VxRail Appliance Family, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail E Series Nodes, VxRail P Series Nodes, VxRail S Series Nodes
, VxRail V Series Nodes
...
Products
VxRail VD Series NodesArticle Properties
Article Number: 000227909
Article Type: How To
Last Modified: 20 Aug 2024
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.