PowerScale：啟用安全開機會導致升級至 OneFS 9.5.1.0 失敗

Summary: 啟用安全開機 升級至 OneFS 9.5.1.0 時導致升級失敗。原因識別為開機資訊清單檔案的問題。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

為升級而重新啟動節點時，開機程序無法完成。使用空調制解調器纜線和終端程式連線至節點時，您會看到類似的訊息：
  
140100,0x80000)
Setting currdev to disk3p6:
isi_set_efi_variable: Set 'isilon-journal-size'='0000000001000000'
Testing hash: sha1 Passed
Testing hash: sha256 Passed
Testing hash: sha384 Passed
Testing hash: sha512 Passed
cannot verify: /boot/lua/../manifest.rcerts: Validation failed, err = 62
Startup error in /boot/lua/loader.lua:
LUA ERROR: cannot open /boot/lua/loader.lua: no error.

currdev = disk3p6:
Unverified /boot/kernel/kernel: Validation failed, err = 62
can't load 'kernel'

Type '?' for a list of commands, 'help' for more detailed help.

Cause

資訊清單檔案的問題會導致安全開機功能檢查失敗，導致節點無法開機。

Resolution

此問題的永久修正是在 OneFS 9.5.1.1 及更新版本中，客戶應升級至較新的程式碼。

如果客戶需要 OneFS 9.5.1.0，唯一的選項是停用安全開機功能，直到您可以升級到 9.5.1.1 或更新版本為止。  有關禁用安全啟動的說明文件， 請參閱 https://infohub.delltechnologies.com/en-us/l/dell-powerscale-onefs-security-considerations/configuration-4151/

Affected Products

PowerScale, Isilon Gen6.5, PowerScale Archive A300, PowerScale Archive A3000, PowerScale B100, PowerScale F200, PowerScale F210, PowerScale F600, PowerScale F710, PowerScale F900

Products

PowerScale F910, PowerScale Hybrid H700, PowerScale Hybrid H7000, PowerScale P100
Article Properties
Article Number: 000231619
Article Type: Solution
Last Modified: 13 Feb 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.