PowerFlex enable_background_device_scanner, API ve günlük değişiklikleri

ScaleIO v2.5 sürümünden itibaren, HF1 karşılaştırma modunda, karşılaştırma hatalarını düzeltmeyi atlamak ve /opt/emc/scaleio/logs/comparison.0 dosyasında rapor oluşturmak için yeni bir seçenek bulunur. Bu, normal durumda karşılaştırma modunun bir parçası olan device_only modunun okuma, onarım ve raporlama işlevselliğini de devre dışı bıraktı. 

Scli ve API değişikliklerinin yanı sıra, v3.0.0.2 HF ile arka plan tarayıcı karşılaştırma modu etkinleştirildiğinde SDS düğümlerine bazı ek günlük kaydı eklenmiştir.

Değişiklikler Günlük Değişiklikleri: /opt/emc/scaleio/sds/logs/comparison.x

 19/11 10:50:12.446570 Scanning combs for device be4c66a400000001, loop #1945 ended, #scanned combs=137, #sec combs (skipped)=69, #primary combs skipped=0, #scanned teeth=19418

Varsayılan comparisons.x dosyası sayısını 10'dan daha küçük bir sayıya düşürme adımları:

 echo "tgt_comparison_file_history =2" >> /opt/emc/scaleio/sds/cfg/conf.txt ; pkill sds

Bu işlemi, dosyaların azaltılması gereken tüm SDS'lerde gerçekleştirin. Birincil ve ikincil arasında doğrulamak için yeni CRC32 çıktı günlük dosyaları (PRI veya SEC'den 1 MB kullanıcı verileri için karma çıktıyı içerir):

 /opt/emc/scaleio/sds/logs/{randomID}_compare_combID_offset_[pri/sec].log

ÖRNEK:

 /opt/emc/scaleio/sds/logs/1259357004_compare_71f2800001b5_18432_pri.log
Trace entry correlating in comparison.x:
13/11 14:03:54.470982 vtreeId a227e28500000000 Comb 71f2800001b5, offset 18432 - compare error - succeeded to fix the secondary by the primary, randId 1259357004.

Corresponding sds/logs/trc.x logs:

trc.5:13/11 14:03:54.459658 0x7f598e35ddb8:mgStorageRegion_VerifyDataCRC:02769: primary and secondary checksums are different (pri=1025730551, sec=3956700141). will dump the error. randId 1259357004. combId:71f2800001b5,vTree:0xa227e28500000000,offsetVol:0x12da000,offsetInComb:18432,sizeInLbs:2048,phyToothIdx:2608,srcToothIdx:inv,dstToothIdx:inv New:(0,0) Requested:(3,1) volId:0
trc.5:13/11 14:03:54.470972 0x7f598e35ddb8:raidScan_FixSecondaryByPrimary:00295: comb:71f2800001b5,vTree:0xa227e28500000000,offsetVol:0x12da000,offsetTooth:0x0, Comb 71f2800001b5, offset 18432 - fix the secondary by the primary, randId 1259357004, rc = SUCCESS
trc.5:13/11 14:03:54.470988 0x7f598e35ddb8:raidScan_HandleComparisonError:01006: compare error - succeeded to fix the secondary by the primary. randId 1259357004. combId:71f2800001b5,vTree:0xa227e28500000000,offsetVol:0x12da000,offsetInComb:18432,sizeInLbs:2048,phyToothIdx:2608,srcToothIdx:inv,dstToothIdx:inv New:(0,0) Requested:(3,1) volId:0
trc.5:13/11 14:03:54.472246 0x7f598e35ddb8:raidScan_HandleComparisonError:01046: Sent a message to the MDM on compare error (randId 1259357004). combId:71f2800001b5,vTree:0xa227e28500000000,offsetVol:0x12da000,offsetInComb:18432,sizeInLbs:2048,phyToothIdx:2608,srcToothIdx:inv,dstToothIdx:inv New:(0,0) Requested:(3,1) volId:0

İki çıktı dosyası kontrol ediliyor:

 -rw-rw-rw-. 1 root root     4096 Nov 13 14:03 1259357004_compare_71f2800001b5_18432_pri.log
-rw-r--r--. 1 root root     4096 Nov 19 11:10 1259357004_compare_71f2800001b5_18432_sec.log

diff 1259357004_compare_71f2800001b5_18432_pri.log 1259357004_compare_71f2800001b5_18432_sec.log
Binary files 1259357004_compare_71f2800001b5_18432_pri.log and 1259357004_compare_71f2800001b5_18432_sec.log differ


[root@localhost logs]# md5sum 1259357004_compare_71f2800001b5_18432_pri.log
d11924aadfe72dd1117f260f8b092caf  1259357004_compare_71f2800001b5_18432_pri.log
[root@localhost logs]# md5sum 1259357004_compare_71f2800001b5_18432_sec.log
620f0b67a91f7f74151bc5be745b7110  1259357004_compare_71f2800001b5_18432_sec.log

Eski Komut

 scli --enable_background_device_scanner
Error: Either a valid Storage Pool ID or name must be specified

Usage: scli --enable_background_device_scanner (((--protection_domain_id  | --protection_domain_name ) --storage_pool_name ) | --storage_pool_id ) --scanner_mode  [--scanner_bandwidth_limit ] [--report_and_fix | --report_only]
Description: Enable background device scanner
Parameters:
    --protection_domain_id          Protection Domain ID
    --protection_domain_name      Protection Domain name
    --storage_pool_name           Storage Pool name
    --storage_pool_id               Storage Pool ID
    --scanner_mode                Scanner mode of operation where MODE can be one of the following:
                                        device_only - Perform read operations. Fix from peer on errors
                                        data_comparison - Perform the device_only test and compare the data content with peer. Not supported for fine granularity Storage Pools
    --scanner_bandwidth_limit           Bandwidth limit in KB per second per device. The given value should be between 10KB and 10MB. The default value is 3MB
    --report_and_fix                    Report errors and automatically fix them (default)
    --report_only                       Report errors without fixing them

Yeni Komut

 Usage: scli --enable_background_device_scanner (((--protection_domain_id  | --protection_domain_name ) --storage_pool_name ) | --storage_pool_id ) --read_error_action  --compare_error_action  [--scanner_bandwidth_limit ]
Description: Enable background device scanner
Parameters:
    --protection_domain_id          Protection Domain ID
    --protection_domain_name      Protection Domain name
    --storage_pool_name           Storage Pool name
    --storage_pool_id               Storage Pool ID
    --read_error_action         Read error handling. Can be one of the following:
                                        report_and_fix - Perform read operations and automatically fix from peer on errors
                                        report_only    - Perform read operations and report errors without fixing them
    --compare_error_action      Compare error handling. Can be one of the following:
                                        no_compare     - Perform read operations without comparing data content with peer
                                        report_and_fix - Perform read operations, compare data content with peer, and automatically fix
                                                         Not supported for fine granularity Storage Pools
                                        report_only    - Perform read operations, compare data content with peer, and report mismatches without fixing them
                                                         Not supported for fine granularity Storage Pools
    --scanner_bandwidth_limit           Bandwidth limit in KB per second per device. The given value should be between 10KB and 10MB. The default value is 3MB