PowerFlex kan inte lägga till befintlig resursgrupp: Ogiltig switchportskonfiguration
Summary: Det går inte att lägga till en befintlig resursgrupp (RG) på grund av en ogiltig switchportskonfiguration
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Loggar för tunn distribuerare visar följande:
RuntimeError: port_channel_protocol failed to validate: should be one of: none_so. none, lacp, standard
Påverkan
Det går inte att lägga till befintlig RG i systemet igen.
Cause
|
PFxM kräver en giltig konfiguration för att RG ska kunna läggas till. Mer information finns i följande KB: PowerFlex Manager: Krav på partiell nätverksautomatisering | Dell USA |
Resolution
|
Ändra systemkonfigurationen så att den överensstämmer med PFxM:s krav. |
Versioner som påverkas
PFxM 3.x
PFMP 4.x
Affected Products
PowerFlex rack, ScaleIOArticle Properties
Article Number: 000305272
Article Type: Solution
Last Modified: 08 Apr 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.