PowerStore:単一の外部ホストにすべてのホスト イニシエーターが存在しない場合、無停止でのインポートでホストの追加に失敗する
Summary: ホストの追加に失敗しました。1つの外部ホストにすべてのホスト イニシエーターが存在していないためです。イニシエーターの設定を確認してから再度試行してください。(0xE0301003001D)
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
無停止(エージェントベース)でのインポートが失敗し、次のエラー メッセージが表示されます。
Addition of host failed due to not all host initiators present in a single external host. Check the initiator configuration and try again. (0xE0301003001D)Cause
インストールされたホスト プラグインは、ホストに存在するかホスト上で構成されているすべてのFCまたはiSCSIイニシエーターをPowerStoreに報告します。ホストプラグインのインストール中に、iSCSI IQNまたはFC WWPNのみが報告されるように転送タイプが設定されます
PowerStoreは、すべてのイニシエーターを同じホスト オブジェクトに関連づけることができるかどうかを検証します。
ホストにそれぞれ2つのポートを持つ2つのFC HBAがある場合は、4つすべてのWWPNがPowerStoreに報告されます。
ホストは、HBAごとに1つのイニシエーターのみを使用してPowerStoreに接続している可能性があります。PowerStore上のホスト オブジェクトにホストのすべてのイニシエーター(接続されていないイニシエーターも含む)が含まれていない場合、このエラー メッセージが表示されます。
Resolution
すべてのiSCSIまたはすべてのFCイニシエーターを、PowerStoreへのアクティブな接続がない場合でもホスト オブジェクトに追加します。
[Compute]、[Host Information]の順に移動し(ホスト グループを選択)、ホスト、イニシエーター、イニシエーターの追加
PowerStoreへのアクティブなセッションのないイニシエーターを手動で追加する必要があります。
IOを可能にするために、ホストにはストレージへの冗長接続が必要です。追加のイニシエーターを接続する必要はありません。
その後、インポートを再試行します
Affected Products
PowerStore 1000X, PowerStore 1000T, PowerStore 1200T, PowerStore 3000X, PowerStore 3000T, PowerStore 3200Q, PowerStore 3200T, PowerStore 5000X, PowerStore 5000T, PowerStore 500TProducts
PowerStore 5200T, PowerStore 7000X, PowerStore 7000T, PowerStore 9000X, PowerStore 9000T, PowerStore 9200TArticle Properties
Article Number: 000322232
Article Type: Solution
Last Modified: 23 May 2025
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.