PowerStore: 단일 외부 호스트에 일부 호스트 이니시에이터가 없는 경우 무중단 가져오기에서 호스트 추가에 실패
Summary: 단일 외부 호스트에 일부 호스트 이니시에이터가 없어 호스트 추가에 실패했습니다. 이니시에이터 구성을 확인하고 다시 시도하십시오. (0xE0301003001D)
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
무중단(에이전트 기반) 가져오기가 실패하고 다음 오류 메시지가 표시됩니다.
Addition of host failed due to not all host initiators present in a single external host. Check the initiator configuration and try again. (0xE0301003001D)Cause
설치된 호스트 플러그인은 호스트에 있거나 호스트에 구성된 모든 FC 또는 iSCSI 이니시에이터를 PowerStore에 보고합니다. 호스트 플러그인 설치 중에 iSCSI IQN 또는 FC WWPN만 보고되도록 전송 유형이 설정됩니다.
그런 다음 PowerStore는 모든 이니시에이터를 동일한 호스트 오브젝트에 연결할 수 있는지 검증합니다.
호스트에 각각 2개의 포트가 있는 FC HBA가 2개 있는 경우 4개의 WWPN이 모두 PowerStore에 보고됩니다.
호스트가 PowerStore에 연결하는 데 HBA당 하나의 이니시에이터만 사용할 수 있습니다. PowerStore의 호스트 오브젝트에 호스트의 모든 이니시에이터(연결되지 않은 이니시에이터 포함)가 포함되어 있지 않은 경우 이 오류 메시지가 표시됩니다.
Resolution
PowerStore에 대한 활성 연결이 없는 경우에도 모든 iSCSI 또는 모든 FC 이니시에이터를 호스트 오브젝트에 추가합니다.
Compute, Host Information(호스트 그룹 선택)으로 이동하여 Host, Initiators, Add Initiators Initiators를 선택하고 활성 세션이 없는 이니시에이터를
PowerStore에 수동으로 추가해야 합니다.
IO를 허용하려면 호스트에 스토리지에 대한 이중화 연결이 있어야 하며 추가 이니시에이터를 연결할 필요가 없습니다.
그런 다음 가져오기를 다시 시도하십시오
Affected Products
PowerStore 1000X, PowerStore 1000T, PowerStore 1200T, PowerStore 3000X, PowerStore 3000T, PowerStore 3200Q, PowerStore 3200T, PowerStore 5000X, PowerStore 5000T, PowerStore 500TProducts
PowerStore 5200T, PowerStore 7000X, PowerStore 7000T, PowerStore 9000X, PowerStore 9000T, PowerStore 9200TArticle Properties
Article Number: 000322232
Article Type: Solution
Last Modified: 23 May 2025
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.