ECS: ObjectScale: Slik kjører du KB-automatiseringsskript (autopilot)

Summary: CLI-kommandoer for å kjøre KB-automatiseringsskript.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Fra xDoctor for ECS v4.8-104.0 og fremover er en xdoctor-ansible beholder inkludert som lar brukeren kjøre KB Automation-skript fra CLI.

Ansible

Hjelp

Oversikt

admin@provo-gen3-cyan:~> sudo xdoctor ansible --help

┌────────────────────────────────┐
│ xDoctor Ansible Container Help │
└────────────────────────────────┘
usage: xdoctor ansible [-h] [--info] [--start] [--cleanup] [--update]

optional arguments:
  -h, --help  show this help message and exit
  --info      Current Info of the xDoctor Ansible Container
  --start     Start the xDoctor Ansible Container
  --cleanup   Stop, Remove and Unload the xDoctor Ansible Container
  --update    Update the xDoctor Ansible Container

Info

Gjeldende informasjon og status for xDoctor Ansible Container

admin@provo-gen3-cyan:~> sudo xdoctor ansible --info

Note: xdoctor/ansible image is outdated, please use `sudo xdoctor ansible --update` ...

┌────────────────────────────────┐
│ xDoctor Ansible Container Info │
└───┬────────────────────────────┘
    │ Latest image     = /opt/emc/xdoctor/repo/xdoctor-ansible_3.0.0-1105.4c5593a9.xz
    │ Latest version   = 3.0.0-1105.4c5593a9
    │ Loaded image     = c8a434239326
    │ Loaded version   = 2.9.0-1078.fa1dcdcb
    │ Container        = RUNNING
    │ Status           = RUNNING

Oppdater

Oppdatering av xDoctor Ansible Container
Den xDoctor Ansible Container er bygget i xDoctor RPM pakken. Dette betyr at hver gang du oppgraderer xDoctor, kan et nytt Ansible Container Image også være tilgjengelig. Det vises et varsel når det lastede bildet kan oppdateres av et nytt.

admin@provo-gen3-cyan:~> sudo xdoctor ansible --info

Note: xdoctor/ansible image is outdated, please use `sudo xdoctor ansible --update` ...

┌────────────────────────────────┐
│ xDoctor Ansible Container Info │
└───┬────────────────────────────┘
    │ Latest image     = /opt/emc/xdoctor/repo/xdoctor-ansible_3.0.0-1105.4c5593a9.xz
    │ Latest version   = 3.0.0-1105.4c5593a9
    │ Loaded image     = c8a434239326
    │ Loaded version   = 2.9.0-1078.fa1dcdcb
    │ Container        = RUNNING
    │ Status           = RUNNING

admin@provo-gen3-cyan:~> sudo xdoctor ansible --update

Ansible Update ...
Successfully stopped, removed and unloaded the xdoctor-ansible container/image
The xdoctor-ansible container is not running. Starting it ...

admin@provo-gen3-cyan:~> sudo xdoctor ansible --info

┌────────────────────────────────┐
│ xDoctor Ansible Container Info │
└───┬────────────────────────────┘
    │ Latest image     = /opt/emc/xdoctor/repo/xdoctor-ansible_3.0.0-1105.4c5593a9.xz
    │ Latest version   = 3.0.0-1105.4c5593a9
    │ Loaded image     = 77928ed0705e
    │ Loaded version   = 3.0.0-1105.4c5593a9
    │ Container        = RUNNING
    │ Status           = RUNNING

Start

Starte xDoctor Ansible Container

Merk: Denne handlingen kan bare utføres på primærnoden. 
admin@provo-gen3-cyan:~> sudo xdoctor ansible --start

Ansible Start ...
The xdoctor-ansible container is not running. Starting it ...

admin@provo-gen3-cyan:~> sudo xdoctor ansible --info
┌────────────────────────────────┐
│ xDoctor Ansible Container Info │
└───┬────────────────────────────┘
    │ Latest image     = /opt/emc/xdoctor/repo/xdoctor-ansible_3.0.0-1105.4c5593a9.xz
    │ Latest version   = 3.0.0-1105.4c5593a9
    │ Loaded image     = 77928ed0705e
    │ Loaded version   = 3.0.0-1105.4c5593a9
    │ Container        = RUNNING
    │ Status           = RUNNING

Opprydding

Stopp, fjern og losse xDoctor Ansible Container og bilde.

admin@provo-gen3-cyan:~> sudo xdoctor ansible --cleanup

Ansible Cleanup ...
Successfully stopped, removed and unloaded the xdoctor-ansible container/image


admin@provo-gen3-cyan:~> sudo xdoctor ansible --info
┌────────────────────────────────┐
│ xDoctor Ansible Container Info │
└───┬────────────────────────────┘
    │ Latest image     = /opt/emc/xdoctor/repo/xdoctor-ansible_3.0.0-1105.4c5593a9.xz
    │ Latest version   = 3.0.0-1105.4c5593a9
    │ Loaded image     = NO_IMAGE_LOADED
    │ Loaded version   = NO_IMAGE_LOADED
    │ Container        = NO_CONTAINER
    │ Status           = NOT_LOADED

Autopilot

Hjelp

Oversikt

admin@ecsnode1:~> sudo xdoctor autopilot --help
usage: xdoctor autopilot [-h] [--kb KB] [--kb-list]
                         [--target-node TARGET_NODE] [--target-vdc TARGET_VDC]
                         [--target-rack TARGET_RACK] [--debug]

optional arguments:
  -h, --help            show this help message and exit
  --kb KB               KB number
  --kb-list             List of available KB automations
  --target-node TARGET_NODE
                        Target Node
  --target-vdc TARGET_VDC
                        Target VDC
  --target-rack TARGET_RACK
                        Target Rack
  --debug               Debug Mode

KB-liste

Liste over tilgjengelige KB Automation-skript

admin@provo-gen3-cyan:~> sudo xdoctor autopilot --kb-list

╔═════════════════════════════════╗
║ Available KB Automation Scripts ║
╚═════════════════════════════════╝
 ╓────────────────╖
 ║ CUSTOMER Level ║
 ╙────────┬───────╜
 ┌────────┼──────┬──────────┬───────────────────┐
 │ KB Nr. │ Ver. │ KB Title │ Supported Targets │
 └────────┼──────┴──────────┴───────────────────┘
 ┌────────┼──────┬───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┬───────────────┐
 │ 64221  │ 3.0  │ ECS: xDoctor: RAP081: SymptomCode: 2048: NTP daemon not running or All servers not suitable for synchronization found │ --target-rack │
 └────────┼──────┴───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬──────────────────────────────────────────────────────────────────────────┬───────────────┐
 │ 79798  │ 3.0  │ ECS: xDoctor: RAP007: SymptomCode: 2028: Root File System Low Disk Space │ --target-node │
 └────────┼──────┴──────────────────────────────────────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬──────────────────────────────────────────────────────────────────┬──────────────────────────────────────────┐
 │ 81550  │ 3.0  │ ECS: xDoctor: RAP059: Detected rsyslogd is not running on a node │ --target-node --target-rack --target-vdc │
 └────────┼──────┴──────────────────────────────────────────────────────────────────┴──────────────────────────────────────────┘
 ┌────────┼──────┬────────────────────────────────────────────────────────────────────────────────┬───────────────┐
 │ 203562 │ 3.0  │ ECS: xDoctor RAP145: rackServiceMgr is using memory above configured threshold │ --target-rack │
 └────────┼──────┴────────────────────────────────────────────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬──────────────────────────────────────────────────────────────────────────┬──────────────────────────────────────────┐
 │ 205933 │ 3.0  │ ECS: xDoctor: RAP137: Total swap memory inconsistent across the ECS rack │ --target-node --target-rack --target-vdc │
 └────────┼──────┴──────────────────────────────────────────────────────────────────────────┴──────────────────────────────────────────┘
 ┌────────┼──────┬──────────────────────────────────────────────────────────────────────────────────────┬──────────────────────────────────────────┐
 │ 209779 │ 3.0  │ ECS High load observed on ECS nodes/performance issues observed in 3.6.x/3.7.x/3.8.x │ --target-node --target-rack --target-vdc │
 └────────┼──────┴──────────────────────────────────────────────────────────────────────────────────────┴──────────────────────────────────────────┘
 ┌────────┼──────┬─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┬───────────────┐
 │ 20987  │ 3.0  │ ECS: How to clear svc tools cache from reporting old values; svc tools are reporting old values when executing commands │ --target-node │
 └────────┼──────┴─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬───────────────────────────────────────────────────────────────────────────────────┬──────────────┐
 │ 35068  │ 3.0  │ ECS: xDoctor: RAP040: The /root/MACHINES files are not consistent across the rack │ --target-vdc │
 └────────┼──────┴───────────────────────────────────────────────────────────────────────────────────┴──────────────┘
 ┌────────┼──────┬──────────────────────────────────────────────────────────┬───────────────┐
 │ 39838  │ 3.0  │ ECS: xDoctor: RAP073: Switch Connection Failure detected │ --target-rack │
 └────────┼──────┴──────────────────────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬───────────────────────────────────────────────────────────────┬───────────────┐
 │ 50341  │ 3.0  │ ECS xDoctor: One or More Network Interface is Down or Missing │ --target-node │
 └────────┼──────┴───────────────────────────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬───────────────────────────────────────────────────────────────────────────────┬──────────────┐
 │ 224905 │ 3.0  │ ECS: Compliance Check failed with Port 13000 is not in allowed udp ports list │ --target-vdc │
 └────────┼──────┴───────────────────────────────────────────────────────────────────────────────┴──────────────┘
 ┌────────┼──────┬──────────────────────────────────────────────────┬───────────────┐
 │ 182750 │ 3.0  │ ECS: Gen3: ipmitool fails to query the BMC/iDRAC │ --target-node │
 └────────┼──────┴──────────────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬─────────────────────────────────────────────────────────────────────────────────────────────────────────────────┬───────────────┐
 │ 78420  │ 3.0  │ ECS: xDoctor RAP092: slave-X or pslave-X is not communicating with one or more ToR switches after a node reboot │ --target-node │
 └────────┼──────┴─────────────────────────────────────────────────────────────────────────────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬────────────────────────────────────────┬───────────────┐
 │ 19614  │ 3.0  │ ECS: How to add or remove a DNS server │ --target-rack │
 └────────┼──────┴────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬──────────────────────────────────────────────────────┬───────────────┐
 │ 20769  │ 3.0  │ ECS: How to setup SNMP v2c and v3 monitoring support │ --target-rack │
 └────────┼──────┴──────────────────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬─────────────────────────────────────────┬───────────────┐
 │ 273244 │ 3.0  │ ECS: How to add or remove an NTP server │ --target-rack │
 └────────┼──────┴─────────────────────────────────────────┴───────────────┘
 ┌────────┼──────┬────────────────────────────────────────────────────────────────┬──────────────┐
 │ 201555 │ 3.0  │ ECS: RAP075 Application reporting 403 error due to time skewed │ --target-vdc │
 └────────┼──────┴────────────────────────────────────────────────────────────────┴──────────────┘
          ▀

Identifisere målet

Slik identifiserer du IP-en for NAN-noden, rackfargen (navnet) eller VDC-navnet fra utdataene for ECS-/ObjectScale-systemtopologien.

Koble til den aktive noden til rack:Command:

# ssh master.rack

Kjør kommandoen:

# sudo xdoctor --top --vdc

Denne kommandoen viser ECS-systemtopologien, inkludert VDC-er, racker og noder.

admin@ecsnode1:~> sudo xdoctor --top --vdc

ECS
|
|- CLOUD - ID:[21a7111a45e4a9dbca62e0fee1749bbb]
   |
   |- Local VDC - ID:[8af5b9c3-9c0c-43b5-9402-14d181ade5bf] Name:[VDC1]
   |- Local SP  - ID:[52576f30-f8f3-493a-9999-6fee4494f53b] Name:[SP1]
   |  |
   |  |- Local RACK - Name:[red] Primary:[169.254.1.1] PSNT:[CKM0000000000] SWID:[CKM0000000000]
   |  |  |
   |  |  |- Node  1, [   provo], NAN.IP:[    169.254.1.1], Public.IP:[   0.0.0.0], DNS:[               ], NTP:[               ]
   |  |  |- Node  2, [   sandy], NAN.IP:[    169.254.1.2], Public.IP:[   0.0.0.0], DNS:[               ], NTP:[               ]
   |  |  |- Node  3, [    orem], NAN.IP:[    169.254.1.3], Public.IP:[   0.0.0.0], DNS:[               ], NTP:[               ]
   |  |  |- Node  4, [   ogden], NAN.IP:[    169.254.1.4], Public.IP:[   0.0.0.0], DNS:[               ], NTP:[               ]
   |  |  |- Node  5, [  layton], NAN.IP:[    169.254.1.5], Public.IP:[   0.0.0.0], DNS:[               ], NTP:[               ]
   |  |  |- Node  6, [   logan], NAN.IP:[    169.254.1.6], Public.IP:[   0.0.0.0], DNS:[               ], NTP:[               ]
   |  |  |- Node  7, [    lehi], NAN.IP:[    169.254.1.7], Public.IP:[   0.0.0.0], DNS:[               ], NTP:[               ]
   |  |  |- Node  8, [  murray], NAN.IP:[    169.254.1.8], Public.IP:[   0.0.0.0], DNS:[               ], NTP:[               ]


Note: 'xdoctor --top --details' displays detailed VDC -and Rack information

Finn Virtual Data Center (VDC):

  • Se etter linjen som begynner med: 
    |- Local VDC - ID:[…] Name:[VDC1]
  • VDC-navnet vises på slutten av linjen.
    Eksempel: 
    VDC1

Slik finner du racknavnet:

  • Under VDC-delen finner du Local RACK: 
    |- Local RACK - Name:[red] Primary:[169.254.1.1] PSNT:[…]
  • Rackfargen indikeres av "Navn"-feltet.
    Eksempel: red

Identifiser NAN IP-noden av interesse:

  • Under racket er hver node oppført med navn og IP-adresser: 
    |- Node 1, [ provo], NAN.IP:[ 169.254.1.1], Public.IP:[ 0.0.0.0 ] |- Node 2, [ sandy], NAN.IP:[ 169.254.1.2],

KB-artikkel

Kjøre et KB-automatiseringsskript
I eksemplet nedenfor utføres det automatiserte skriptet for KB 79798 på node 169.254.6.2.

Merk: Du finner de tilgjengelige KB Automation-skriptene ved å kjøre følgende: 
sudo xdoctor autopilot --kb-list
Merk: Du finner de tilgjengelige målnodene ved å kjøre følgende: 
getrackinfo
Eller 
getclusterinfo
Eller begge deler 
admin@provo-gen3-cyan:~> sudo xdoctor autopilot --kb=79798 --target-node=169.254.6.2

...
[Prompt for acknowledgement]
*******************************************************************************
*******************************************************************************
This Automated Knowledge Base (KB) will identify and remove frequently encountered files from the ObjectScale and ECS, aiming to safely reclaim space in the root file system. To proceed, you can review or delete the files on the system.

Would you like to proceed with the steps by typing 'Yes' or 'Y', or skip the review and deletion actions by typing 'No' or 'N'
*******************************************************************************
*******************************************************************************
Yes
...
Status: PASS
Time Elapsed: 0h 1m 5s
Debug log: /tmp/autopilot/log/autopilot_79798_20250623_123509.log
Message:  Before cleanup available space: 220G used percentage: 50%. After cleanup available space: 240G / used percentage: 46%. Space reclaimed: 20.0G.

Automatisering av kjøringsatferd

Alle automatiseringer utføres i løpet av en skjermøkt, og systemet tillater bare én samtidig kjøring om gangen. Hvis en automatisering forblir uten tilsyn i mer enn 1 time, avbrytes skjermøkten automatisk og kan ikke gjenopptas.

Når automatiseringen startes for første gang, skrives kommandoen for skjermøkt ut på terminalen. Dette lar deg koble til økten om nødvendig, så lenge den er innenfor vinduet på 1 time.

Liste over og legg til kommandoer på nytt:

# sudo screen -ls
# sudo screen -r [session_name]

Eksempel på mer enn én samtidig økt:

admin@ecsnode1:~> sudo xdoctor autopilot --kb 79798 --target-node 169.254.1.1
Checking for existing screen sessions...
Starting screen session 'autopilot_kb_79798_20250625_175515'...
Screen session 'autopilot_kb_79798_20250625_175515' started successfully.
Attaching to screen session 'autopilot_kb_79798_20250625_175515'...
Using /etc/ansible/ansible.cfg as config file
This Autopilot Automation was blocked because the maximum number of concurrent executions (1) has been reached. Please try again later.
[screen is terminating]
admin@ecsnode1:~>

 

Additional Information

Se denne videoen:

ObjectScale: Slik kjører du skript for KB-automatisering.

Varighet: 00:08:04 (hh:mm:ss)
Når språkinnstillingene for teksting (undertekster) er tilgjengelige, kan du velge ved hjelp av CC-ikonet på denne videospilleren.

Du kan også se denne videoen på YouTube.

 

Affected Products

ECS, ECS Appliance
Article Properties
Article Number: 000336224
Article Type: How To
Last Modified: 24 Sep 2025
Version:  9
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.