Isilon Front-End Networking Deployment Videos
Summary: Configure Dell EMC Switches for Isilon Front-End Networking. Front-End Networking for Isilon Storage
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
This set of videos discusses the deployment of the Dell EMC Isilon X210 with Dell EMC switches in a Layer 2(Switched) and Layer 3(Routed) leaf-spine topology. It provides step-by-step configuration examples of Layer 3 (routed) architecture and Layer 2 (switched) architecture. The objective is to enable a network administrator or engineer with traditional networking experience to configure and deploy a layer 2 and layer 3 leaf-spine architecture with DellEMC switches and Isilon X210 using the example provided.
THIS SET OF VIDEOS IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN ERRORS. ONLY ATTEMPT THIS IMPLEMENTATION IN A TEST ENVIRONMENT WITH NO BUSINESS INFRASTRUCTURE IMPACT. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES.
Isilon Networking Front-End Deployment Video Part 1 - Networking Configuration
Isilon Networking Front-End Deployment Video Part 2 - Storage Array Configuration
Article Properties
Article Number: 000146111
Article Type: Solution
Last Modified: 21 Feb 2021
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.