How to Restart a Dell Compellent Using Dell Storage Manager

概要: This article explains how to restart the Dell Compellent series storage system.

この記事は次に適用されます： この記事は次には適用されません： この記事は、特定の製品に関連付けられていません。 すべての製品パージョンがこの記事に記載されているわけではありません。
他のリソースを確認する

手順

How to restart controller:

This step uses the upper controller but each step is the same for the lower controller.
  1. Log in to either the Dell Storage Manager or the Enterprise Manager.
  2. Click the Hardware tab, and expand the Controller from the left pane.
  3. Right-click the Upper Controller and click Shutdown/Restart Controller. (To restart the lower controller, right-click the Lower Controller.)

Note: If you changed the controller name individually, ensure that you selected the appropriate controller to be restarted by checking the controller number shown in Index.
 
  1. In the Shutdown/Restart Controller window, select Restart the controller from the pulldown menu and click OK
  2. Now the controller should restart.
  3. Click OK when you see "The upper (or lower) controller has restarted successfully" message on the screen.
  4. Click the Summary tab on the Dell Storage Manager or Enterprise Manager.
  5. If the message "The controller port of this Storage Center is currently unadjusted due to the failover" appears, click the Readjust port.

Note: This step is not required for the SCv2000 series.
 
  1. Readjustment starts.
  2. Check that the status after the readjustment is Completed.
  3. If the screen is not refreshed, click the Refresh on the screen several times.
 

Need more help?
 
Find additional SC Series related articles

Go to and ask for support in our Communities 

Create an Online Support Request

対象製品

Compellent (SC, SCv & FS Series), SC Series, Dell Storage Manager
文書のプロパティ
文書番号: 000112952
文書の種類: How To
最終更新: 29 7月 2025
バージョン:  5
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。